F3-12800CL9D-4GBNQ | F3-12800cl7d-4gbrm | asus m4a79xtd evo

[Lord Mirko]

ok opened 150 application ssd is great running 1333 1.66 8-8-8-24 (if i set command rate to 2t it crashe) STABLE for now.

it uses now 7.8 gb

wow cpu not even used to 50%

[Lord Mirko]

yep random crahes from cold boot doesnt even go to post any suggestions

[Tradesman]

1.55 for voltage on the DRAM

[Lord Mirko]

how much should i set cpu nb

0.800 to 1.280 -- 1.300 is red
incremental 0.0.125

any sugestions

[Tradesman]

Try 1.230 for starters

[Lord Mirko]

In one of the stickys it says

CPU Host/Bus Frequency to 240 where is that this will overclock it to 1600


so.

8-8-8-24 1333 mhz
cpu/nb 1.230 for starters


any suggestions where it is. thank you

[Lord Mirko]

bus i aded 240
ht 2400
ram
1600
1.6
9-9-9-24 2t
cpu/nb 1.300

overclock cpu is 3.6

it passes post wont boot into ubunut

i have a good cooler with 2 fans so want be a problem

how much should i rase cpu volt and cpu/nb or ht any suggestions

amd phenom ii x4 945 95 w c3 3.0 GHz

[Tradesman]

May want to stick w/ 1333, I'm not positive, but don't think the 945 can handle 4 sticks of 1600

[Lord Mirko]

1.300 cpu/nb
9-9-9-24 2t
1333 1.60
memtest 42%fail when all sticks are used randomly it gives allot of erors just tested

any suggestion rasing the cpu/nb or ...

i disbaled cool and quiet

[GSKILL TECH]

Try DDR3-1333 8-8-8-24 1.50V-1.55V

CPU-NB should be OK with 1.15V

Thank you
GSKILL TECH

[Lord Mirko]

ok did one pass again with memetest 43 % when random pattern kick in for all stick errors

but now im 1.5 V 1333 1.5 9-9-9-24 2T cpu/nb 1.300

any sugestions

Thank you so far.

[Lord Mirko]

Try DDR3-1333 8-8-8-24 1.50V-1.55V

CPU-NB should be OK with 1.15V

Thank you
GSKILL TECH

tryed works no frezes and populated the ram fully until the swap was used of linux

encoding gimp stable so far

gonna run memetes repport back in half an hour

[Lord Mirko]

Ok.Memtest 1 pass no errors

so..

the only thing what i changed from last time is

ram 1.5 v disabled cool and quiet and set cpu/nb to 1.15

is there any other bench to test out the ram i dont want any random system frezes and should i enable back cool and quiet.

Thanks for the help so far.

[GSKILL TECH]

You can try a stress test like Prime95.

Cool and quiet is up to you, if you want to save power.

Thank you
GSKILL TECH

[Lord Mirko]

can set ram voltage 1.9 v is it save for 1600 what the max voltage for these rams
want to try overclock

fsb 240
cpu ratio 15
cpu voltage 1.4125 and up below 1.5
cpu freq 2400
ht 2400
nb 1.2

do i need to up cpu-nb for 1600

thanks