baymavi - vevobahis - mobilbahis - instagram takipçi satın al - instagram takipçi satın al mobil ödeme


No announcement yet.

Post your GSkill drive benchmark result here please

  • Filter
  • Time
  • Show
Clear All
new posts

  • would that be that those higher results in write speed are due to a faster memory and system ? My system:
    IDE setup. win 7 on phenom II x4 3.31ghz .... memory at 1066 DDR2, kind of slow. Falcon 64g 20% full.

    Last edited by sirius69; 11-05-2009, 06:27 AM.


    • found this at

      According to a bulletin on the OCZ site;

      AHCI is not official supported on OCZ SSDs and may under some circumstances affect performance,
      specifically during windows installation. Enabling AHCI can result in higher performance in synthetic
      benchmarks for SSDs and HDDs alike, but can cause hang-ups and intermittent freezes in SSDs since it allows multiple access requests to compete for a drive that is not made to address re-ordering of commands in the queue. We recommend AHCI is set to disabled in both Windows and in the BIOS.
      Native Command Queuing greatly increases the performance of standard rotational drives but it has no bearing on SSDs.


      by looking at the benchmark in here, I'm not convince at all that AHCI would help . I keep the IDE mode for now


      • My pc is a i7 920 @ 3.8 with 6gbs crucial ballistik tracer 1600 @ 7 7 7 18 and the SO W7 is installed on SSD.


        • Poor performance from Falcon II 64 B

          When I first bought the 64GB Falcon SSD it gave a benchmark result over 220MB/Sec as per the specs.

          Since then I have loaded Windows XP and Flight Simulator X, plus a few small programs. The results were dropping so I did an optimised defrag on the drive and the results dropped even further. THinking I should not have defragged I re-imaged the SSD and re-installed Windows XP and FSX over a fully formatted partition.

          The results since then have remained as follows give or take a couple of percent:

          This would appear to be less than half the advertised rate for this SSD. I have applied the tweaks listed on this forum and have no further idea on what I should do to increase the speed to what it should be or declare my SSD a dud.

          Comments or suggestions anyone?


          • here are my latest benchmark results on my Falcon I 256GB SSD...ran Wiper and then benchmarked...


            • no tuning, results after 3 months of intensive use

              My results. No wiper, no tuning, 3 months of intensive use.
              Last edited by stainboy; 01-13-2010, 01:14 PM. Reason: bad image
              I7 920 - 12GB GSkill 1600 Mhz - ASUS P6T6 WS Rev. - IBM ServeRAID M - 4x GSkill Falcon 64GB RAID0 - 2x IBM SAS 146GB 15k RAID0- Samsung Spinpoint F1 1TB - 2x ATI 5870 CrossX - HAF932


              • Here's my 128GB Falcon 2 in a mid-2009 13" Macbook Pro

                Decent? Slow? The drive is about 1 week old.
                Last edited by nsx23; 11-08-2010, 05:05 AM.


                • A second reformated install of Win 7 64bits.
                  i7 950 3.06GHz
                  GA X58A UD3R
                  6GB DDR3 1600 G.Skill
                  SSD G.Skill Phoenix Pro 60GB FW 3.1

                  CrystalDiskMark 3.0 x64 (C) 2007-2010 hiyohiyo
                  Crystal Dew World :
                  * MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]

                  Sequential Read : 272.181 MB/s
                  Sequential Write : 256.847 MB/s
                  Random Read 512KB : 258.649 MB/s
                  Random Write 512KB : 241.631 MB/s
                  Random Read 4KB (QD=1) : 22.313 MB/s [ 5447.6 IOPS]
                  Random Write 4KB (QD=1) : 56.077 MB/s [ 13690.7 IOPS]
                  Random Read 4KB (QD=32) : 129.706 MB/s [ 31666.5 IOPS]
                  Random Write 4KB (QD=32) : 194.154 MB/s [ 47400.9 IOPS]

                  Test : 1000 MB [C: 62.0% (34.6/55.8 GB)] (x5) <All 0x00, 0Fill>
                  Date : 2010/11/06 4:22:31
                  OS : Windows 7 Ultimate Edition [6.1 Build 7600] (x64)


                  • My Phoenix Pro 120GB benchmark

                    My computer:
                    MSI 870A Fuzion
                    AMD Phenom II X2 555
                    Gskill DDR3-1600
                    Gskill 120GB Phoenix Pro
                    ATI HD4830
                    Motherboard - MSI 870A Fuzion
                    CPU - AMD Phenom II X2 555
                    Main Drive - G.Skill 120GB Phoenix Pro
                    Memory - G.Skill Ripjaw DDR3 1600 8GB 2x4
                    Video - ATI HD 5850
                    Power Supply - Corsair 550W Modular


                    • Phoenix Pro 60gb x2 in Raid 0
                      AMD SB710


                      • 8x 60GB Gskill Phoenix Pro + LSI 9260-8i

                        results held back by NF200 chip on Asus P6T6 WS Revo

                        Last edited by eva2000; 11-16-2010, 08:08 AM.


                        • 2x 60GB Phoenix Pro RAID 0

                          By p_dub_s at 2010-11-05


                          • I've had my Falcon II 64Gig drive running since Dec 2009.

                            Today I benched it for this thread.

                            Trim under Windows 7 seems to be doing it's job.


                            • G.SKILL Phoenix Series FM-25S2S-120GBP1 2.5" 120GB FW 3.1

                              Win 7 x64

                              G.SKILL Phoenix Series FM-25S2S-120GBP1 2.5" 120GB
                              Intel Core i5-760 Lynnfield 2.8GHz LGA 1156 95W Quad-Core
                              ASUS P7P55D-E Pro
                              G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
                              2 x crossfired SAPPHIRE 100314SR Radeon HD 6870 1GB 256-bit GDDR5 PCI Express 2.1 x16
                              Last edited by Twistednerv; 11-16-2010, 10:16 PM.