Hello everyone how are they? pardon my English is very bad.
I have a problem with g.skills memories, I have different BSOD especially when I'm using the computer, it happens from time to time
I would like to know how to configure the memory properly.
Right now I have them configured as follows:
Running at 1600mhz
DDR3 timing items – Manual
1T/2T Comand timing : 2T
CAS = LATENCY : 9T
Ras to Cas R/W Delay : 9T
Row percharge time : 9T
Minium Ras Active time: 24T
TwTr command dELAY: 6T
TRFC0 for Dimm 1 ; Dimm 3: 90dn
Trfc1 for Dimm 2 dimm 4 : 160dn
Write recovery time:12T
Precharge time 6t
Row cicle time 39T
Ras to Ras delay: 5T
Dram voltage 1.500v
G.skills sniper F3-12800CL9D-8GBSR : CL 9-9-9-24 1.5V
I have the latest BIOS "F5"
In the options: E.O.P.S: I appear larger frequencies, and a call Profile1
Try charging the Profile1 this to work on 1600MHz, but the computer could not start window.
when I try to change the Trfc1 for Dimm 2 dimm 4 : 110dn, the pc does not start
Memtest: 2 hours with no errors.. all good
I have a problem with g.skills memories, I have different BSOD especially when I'm using the computer, it happens from time to time
I would like to know how to configure the memory properly.
Right now I have them configured as follows:
Running at 1600mhz
DDR3 timing items – Manual
1T/2T Comand timing : 2T
CAS = LATENCY : 9T
Ras to Cas R/W Delay : 9T
Row percharge time : 9T
Minium Ras Active time: 24T
TwTr command dELAY: 6T
TRFC0 for Dimm 1 ; Dimm 3: 90dn
Trfc1 for Dimm 2 dimm 4 : 160dn
Write recovery time:12T
Precharge time 6t
Row cicle time 39T
Ras to Ras delay: 5T
Dram voltage 1.500v
G.skills sniper F3-12800CL9D-8GBSR : CL 9-9-9-24 1.5V
I have the latest BIOS "F5"
In the options: E.O.P.S: I appear larger frequencies, and a call Profile1
Try charging the Profile1 this to work on 1600MHz, but the computer could not start window.
when I try to change the Trfc1 for Dimm 2 dimm 4 : 110dn, the pc does not start
Memtest: 2 hours with no errors.. all good
Comment