If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
i just updated bios and everything trying to get this PC running at its best. but i dont think the RAM config is right and to be honest i dont know how to fix iit lol
I tried that, but in bios i didnt see FSB and so on options and then when i put my RAM to 800 1600 it just blue screens and so on. im not sure what im missing exactly oh oh and also why do 2 sticks look like they're running at different speeds than the other 2?
do you know the program they have for their boards the "TurboV"
is this how i would change the NB voltage's and CPU frequency because
this is the only thing ive seen with these options.
FSB = Bus Speed = CPU Clock, default is 200MHz
Your board may have a default setting for 800 (1600MHz), otherwise you would need to increase the CPU clock.
Then manually enter the memory timings and DRAM voltage (1.50v) in your bios.
AMD Phenom II X6 1090T@ 4.2GHz
Corsair H50 Hydro (push/pull intake fans)
ASUS Crosshair V Formula
2x4GB G.Skill RipjawsX@ 1975MHz, 9-10-9-28 (2T)
SLI: 2x EVGA GTX 570's@ 902/1804/2032
Creative SB X-Fi Xtreme Gamer
Corsair HX850W Modular
Cooler Master HAF 922 (200mm side fan)
2x Win 7 Home Premium (x64)
Comment