DDR3 F3-12800CL9-2GBNQ help

[Chazv2]

i just updated bios and everything trying to get this PC running at its best. but i dont think the RAM config is right and to be honest i dont know how to fix iit lol



anyhelp would be appreciated

[Tradesman]

If you want to run them at 1600 take a look at the sticky:

http://www.gskill.us/forum/showthread.php?t=7688

[Chazv2]

I tried that, but in bios i didnt see FSB and so on options and then when i put my RAM to 800 1600 it just blue screens and so on. im not sure what im missing exactly oh oh and also why do 2 sticks look like they're running at different speeds than the other 2?

[GSKILL TECH]

What motherboard do you have?

The "speed" is the same, they just have different profiles. You don't need to worry since you need manual settings anyway.

Thank you
GSKILL TECH

[Chazv2]

my mobo is Asus M4A785TD-V EVO

do you know the program they have for their boards the "TurboV"
is this how i would change the NB voltage's and CPU frequency because
this is the only thing ive seen with these options.

[NemesisChild]

FSB = Bus Speed = CPU Clock, default is 200MHz
Your board may have a default setting for 800 (1600MHz), otherwise you would need to increase the CPU clock.
Then manually enter the memory timings and DRAM voltage (1.50v) in your bios.

[GSKILL TECH]

You can change them directly in BIOS. (Press Del when you start up computer).

TurboV is done in Windows, then it will send settings to BIOS.

Thank you
GSKILL TECH