This is a new build
Windows 7 Ultimate x64 (6.1.7601) Service Pack 1 OS
C/drive: Intel SSD 120 Drive 120GB
SATA 6Gb/s 550 MB/s / 500 MB/s
SATA 3Gb/s 280 MB/s / 260 MB/s
25,000 IOPS / 80,000 IOPS
(Note) waiting on another Intel SSD 120 Drive 120GB, to run C: drive in Raid o .
D/ drive: HL-DT-ST DVD-RAM GH22NS30 SCSI CdRom Device
Intel i7 3770k @ 3.50GHz / turbo 3.90GHz = Enabled
Hyper-Threading = Enabled
Gigabyte G1.Sniper 3 motherboard ( Bio ver. F7 latest )
all setting set to Auto or Default
Memory:[ TridentX ] F3-2666C11D-8GTXD
Specifications Model Number F3-2666C11D-8GTXD
System DESKTOP
System Type DDR3
CPU 3rd Generation Intel Core Processors
M/B Chipset Z77
Capacity 8GB (4GBx2)
Dual Channel kit
Tested Speed DDR3-2666 MHz (PC3-21300)
Tested Latency 11-13-13-35 2N
Tested Voltage 1.65V
Type 240-pin DIMM
SPD Speed 1600 MHz
SPD Voltage 1.5V
Height 54 mm / 2.13 inch
Warranty Lifetime
Fan lncluded Yes
Features Intel XMP (Extreme Memory Profile) Ready
Qualified Motherboards List
ASUS MAXIMUS V GENE
ASUS MAXIMUS V Extreme
ASUS MAXIMUS V Formula
ASUS P8Z77-V DELUXE
ASUS P8Z77-V PRO
Gigabyte GA-Z77X-UD5H
Gigabyte GA-Z77X-UP5 TH
Gigabyte GA-Z77X-UP7
Gigabyte G1.Sniper 3
MSI Z77A-GD65
MSI Z77A-GD55
MSI Z77A-G45
MSI Z77 MPOWER
AsRock Z77 OC Formula
Nvidia GeForce GTX 580
GPU processor: GeForce GTX 580
Driver version: 306.97
DirectX support: 11.1
CUDA Cores: 512
Core clock: 772 MHz
Shader clock: 1544 MHz
Memory data rate: 4008 MHz
Memory interface: 384-bit
Total available graphics memory: 6890 MB
Dedicated video memory: 3072 MB GDDR5
System video memory: 0 MB
Shared system memory: 3818 MB
Video BIOS version: 70.10.48.00.82
IRQ: 16
Bus: PCI Express x16 Gen2
Power Supply : ULTRA PRODUCTS X3? 1000W Power Supply w/ Modular Cable Management, 24-pin ATX, ATX12V, SLI Ready
Mfg. Part No. ULT40064
Item Code. PSU-ULP-ULT40064
Specifications:
AC INPUT 115V/230V 10A/6A 60/50Hz
MAX OUTPUT CURRENT + 5V + 3.3V +12V -12V +5VSB
28A 24A 70A 0.8A 3A
1000W Max Combined Watts 160W 840W 9.6W 15W
980W 19.7W
1000W
Total Output Power:
1000W (Full Load, Nominal Input Voltage)
Efficiency:
85% at Typical Load
Input
AC Input Voltage: 115V/230V
AC Input Frequency: 50-60Hz
AC Input Currents:
?13A (RMS) for 115VAC input
?8A (RMS) for 230VAC input
Ok here is the good part :The system is rock stable with out using Intel XMP (Extreme Memory Profile) profile1 or profile2
The bad part is I got this for one reason ; To run it @ Tested Speed DDR3-2666 MHz
1. The system is unstable using XMP profile1 or profile2
2. I have tried Sticky: How to enable XMP/ manually overclock G.SKILL memory with GIGABYTE Z77 & Ivy Bridge ( did not work, still unstable )
3. At this point I am asking for Help Please, if I missed adding any info please just ask .
Thanks for the help !
Windows 7 Ultimate x64 (6.1.7601) Service Pack 1 OS
C/drive: Intel SSD 120 Drive 120GB
SATA 6Gb/s 550 MB/s / 500 MB/s
SATA 3Gb/s 280 MB/s / 260 MB/s
25,000 IOPS / 80,000 IOPS
(Note) waiting on another Intel SSD 120 Drive 120GB, to run C: drive in Raid o .
D/ drive: HL-DT-ST DVD-RAM GH22NS30 SCSI CdRom Device
Intel i7 3770k @ 3.50GHz / turbo 3.90GHz = Enabled
Hyper-Threading = Enabled
Gigabyte G1.Sniper 3 motherboard ( Bio ver. F7 latest )
all setting set to Auto or Default
Memory:[ TridentX ] F3-2666C11D-8GTXD
Specifications Model Number F3-2666C11D-8GTXD
System DESKTOP
System Type DDR3
CPU 3rd Generation Intel Core Processors
M/B Chipset Z77
Capacity 8GB (4GBx2)
Dual Channel kit
Tested Speed DDR3-2666 MHz (PC3-21300)
Tested Latency 11-13-13-35 2N
Tested Voltage 1.65V
Type 240-pin DIMM
SPD Speed 1600 MHz
SPD Voltage 1.5V
Height 54 mm / 2.13 inch
Warranty Lifetime
Fan lncluded Yes
Features Intel XMP (Extreme Memory Profile) Ready
Qualified Motherboards List
ASUS MAXIMUS V GENE
ASUS MAXIMUS V Extreme
ASUS MAXIMUS V Formula
ASUS P8Z77-V DELUXE
ASUS P8Z77-V PRO
Gigabyte GA-Z77X-UD5H
Gigabyte GA-Z77X-UP5 TH
Gigabyte GA-Z77X-UP7
Gigabyte G1.Sniper 3
MSI Z77A-GD65
MSI Z77A-GD55
MSI Z77A-G45
MSI Z77 MPOWER
AsRock Z77 OC Formula
Nvidia GeForce GTX 580
GPU processor: GeForce GTX 580
Driver version: 306.97
DirectX support: 11.1
CUDA Cores: 512
Core clock: 772 MHz
Shader clock: 1544 MHz
Memory data rate: 4008 MHz
Memory interface: 384-bit
Total available graphics memory: 6890 MB
Dedicated video memory: 3072 MB GDDR5
System video memory: 0 MB
Shared system memory: 3818 MB
Video BIOS version: 70.10.48.00.82
IRQ: 16
Bus: PCI Express x16 Gen2
Power Supply : ULTRA PRODUCTS X3? 1000W Power Supply w/ Modular Cable Management, 24-pin ATX, ATX12V, SLI Ready
Mfg. Part No. ULT40064
Item Code. PSU-ULP-ULT40064
Specifications:
AC INPUT 115V/230V 10A/6A 60/50Hz
MAX OUTPUT CURRENT + 5V + 3.3V +12V -12V +5VSB
28A 24A 70A 0.8A 3A
1000W Max Combined Watts 160W 840W 9.6W 15W
980W 19.7W
1000W
Total Output Power:
1000W (Full Load, Nominal Input Voltage)
Efficiency:
85% at Typical Load
Input
AC Input Voltage: 115V/230V
AC Input Frequency: 50-60Hz
AC Input Currents:
?13A (RMS) for 115VAC input
?8A (RMS) for 230VAC input
Ok here is the good part :The system is rock stable with out using Intel XMP (Extreme Memory Profile) profile1 or profile2
The bad part is I got this for one reason ; To run it @ Tested Speed DDR3-2666 MHz
1. The system is unstable using XMP profile1 or profile2
2. I have tried Sticky: How to enable XMP/ manually overclock G.SKILL memory with GIGABYTE Z77 & Ivy Bridge ( did not work, still unstable )
3. At this point I am asking for Help Please, if I missed adding any info please just ask .
Thanks for the help !
Comment