New: Dangskill

[Dangskill]

Hey my set up is 16G of G.SKILL Ripjaws Z F3-17000CL9Q 21333MHz ( set of 4) working stable Ram at 1866MHz (9-9-9-24) and cpu at 3957MHz with ASUS 890FX Crosshair IV FORMULA -Bios 2002- Still not overclock yet...

[Tradesman]

Dangskill

That is great, could you post the BIOS settings used to help others.

[Dangskill]

To Tman and Jawbone

To Jawbone, My system little older than yours so you can do it with the set of 4 (2133Mhz!) 16G ripjaws Z. My ASUS Crosshair IV Formula just allowing me to set RAM up to 1866MHz in Bios(2002!) Try to run my 1090T at 4100MHz and RAM at 955MHz but not stable! (by using both Turbo V and AMD Overdrive!) All others set at auto! 990Fx must have better RAM supporting!
To the Tman any solution to get my Ripjaws Z model F3-17000CL9Q-16GBZH working at 2000MHz and 2133Mhz. Trying to change it to (9-11-10-28) and 9-10-9-28 but I need the right voltages for all, can you post them for me. I will try it, thanks...

[Dangskill]

To Tman

Show me how to post my Bios thanks.

[Tradesman]

Dangskill

Had us excited for a minute, but in addition to different mobo, completely diff CPU, diff CPU architecture, diff MC (Memory controller) has nothing to do with 8120 this thread is about.

As far as your system, to try and stabilize 16GB at 2000-2133, would require higher voltages than I'd be comfortable even suggesting without being able to get my hands on the box and see the cooling and be able to monitor it

[Dangskill]

just give me the numbers!

My system running cool with Cool-Master V6GT with CPU at 3950MHz and RAM at 1866MHZ CPU cores at 20C, CPU Temp at 33C MB Temp at 27C. I have more room to go but how much more?

[Tradesman]

Might try with only 2 sticks and see if you can them up to 2133 with the 1090T, then if so loosen base timings by one (i.e. if at 9-9-9-29 try 4 sticks at 10-10-10-30) and if needed slowly raise CPU/NB, DRAM and vCore voltages at say + .02 at a time, no guarantees, and keep an eye on temps

[Dangskill]

Will try that

Will try 2 stick at slot # 2 and 4 . Will post them later .. thanks

[Tradesman]

Good luck! Let us know

[GSKILL TECH]

Take pictures of BIOS, upload them to a hosting site like facebook, photobucket, imageshack, tiny pic, etc. etc.

then post the links here so we can see.

Thank you
GSKILL TECH

[Dangskill]

coconfirmed asus crosshair supporting for2sticks 2133Mhz at 2000MHz

Turn on turbo Evo get Auto tune-extr. will get you stable cpu at 3950Mhz and RAM to 1866MHz, from there take 2 sticks # 1and 3 out. Using turbo Evo downclocking cpu to 15.5 at around 3300MHz ( so you have more room to overclock RAM only!).Using AMD Overdrive up all Voltages to max green zones, keeping RAM at 1.65v, pumping up 3 points at a time from 232 to 255you will get cpu at around 3900MHz and RAM over 1000MHz not stable at 1024MHz! (otherwise will shocking pc and made it frozen!)...

[Dangskill]

HT Ref clock 232 to 255 so you get cpu at around 3900MHz and RAM at 1000x2 MHz not stable over 2000MHz

[Dangskill]

Confirmed same pc above crossing to 2070MHz

http://www.facebook.com/editphoto.ph..._id=1323817345
Using AMD Overdrive+ Asus crosshair IV Formula+ AMD 1090T + 16g Ripjaws Z 2133MHZ. Ram up to 2070MHz!

[Dangskill]

Cons. AMD MOBO Ripjaws Z 2133MHZ 16G(4x4G)

CPU HT- at 258MHz-CPU core Mult 15.5x, CPU volt 1.4v-NBv at 1.20v and Dram v at 1.725v. Dram set at 10-10-10-30.

[Dangskill]

Ripjaws Z 2133MHz (4x4G) you made it!

Gskill made a good Ripjaws Z 2133MHZ buy it for AMD MoBo!