Tweet
I am logged in windows now with both sticks installed no bsod so far. Also i run memtest everything is ok no problem, i restart and rerun memtest and it is full or errors.. What bios settings you want me to post? Thanκ you for your effort by the way..
-
-
Primarily the DRAM settings and system voltages (the more the better)Comment
-
Cpu voltages and all other cpu settings are set to auto. Ddr timings
are 9-9-9-24 and 1333 mhz speed. Ddr voltage is 1.70 now and 1.40 for
nb voltage. Also enable mem oc charges and fsb to nb strap to 333 and
load line calibration is enabled. I have disabled usb legacy. There
are also for the ddr the ras to ras delay, row refresh cycle
time,write recovery time,read to percentage time,dram clk skew for
each slot,dram static read control, dynamic read control, read
training, write training, clock twister and transaction booster the
above settings are set to auto because i do not know what they are..Comment
-
Problem solved. I had the kit replaced with kingston value ram and everything is running fine now. Probably my mobo does not support ripjaws, although i really wanted to.. Thanks for your time and your replies!Comment
Comment