baymavi - vevobahis - mobilbahis - https://guncelgirisi.com/. instagram takipçi satın al - instagram takipçi satın al mobil ödeme

Announcement

Collapse
No announcement yet.

Asus P5Q3 + F3-12800CL9D-4GBRL

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Asus P5Q3 + F3-12800CL9D-4GBRL

    Hello,

    I have an Asus P5Q3 Motherboard and a Q8300 Processor. I am running Windows Vista x64 Operating System.

    I had some OCZ Ram but only 4gb and it was discontinued. I was shopping around on newegg the other day and found your ripjaws F3-12800CL9D-4GBRL at a nice price, so I bought 8gb of it.

    I have my bios settings to auto instead of adjusting the voltages and timings on them.

    Every now and then, maybe once a day, I am getting a blue screen. It will usually say IRQL not equal to value blah blah.

    Do I need to adjust it down to 1333mhz or will it run at 1600mhz? Or do I need to change the voltage settings up some more?

    I havent experimented any yet because I didn't wanna mess anything up!

    Thank you!

  • #2
    Off hand first make sure CR (Command Rate at 2), then possible add .05 to the NB and/or .05 to the DRAM voltage. If that doesn't stabilize things, pls post your BIOS timing and voltage settings.....also might raise your tRFC about 6 points, if I remember right your mobo tends to set that a hair low w/ 8GB


    Pls offer comments on support I provide, HERE, in order to help me do a better job here:

    Tman

    Comment


    • #3
      I'll give it a try, thanks!

      Comment


      • #4
        Hopefully it will clear things up, if not get back to me


        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

        Tman

        Comment


        • #5
          Right now, you can use DDR3-1333 8-8-8-24 1.50V.

          The problem with DDR3-1600 9-9-9-24 1.50V is you need to raise CPU FSB to 400 (1600MHz). The CPU FSB must be the same or higher than memory, otherwise it will not work.

          Thank you
          GSKILL TECH

          Comment


          • #6
            Gskill tech,

            I tried the settings you recommended...

            The 1333mhz fsb with 8-8-8-24 timings. I also tried what tradesman recommended... I still get irql not equal blah blah bluescreen.

            Operating system has changed. Using windows 7 64bit.

            The ram is the same. The mobo is the same. etc.

            I also tried the auto settings.

            It seems to bluescreen when the computer wakes up from 'sleep' mode or when I am trying to play a game (black ops) it freezes in game, then bluescreens shortly after.

            Thanks.

            Comment


            • #7
              What is your vCore voltage, NB vol, DRAM vol


              Pls offer comments on support I provide, HERE, in order to help me do a better job here:

              Tman

              Comment


              • #8
                Do you have the latest BIOS? Test each module with memtest to see if one has errors.

                Thank you
                GSKILL TECH

                Comment


                • #9
                  Still having issues. Tested memory and they passed. Have the updated bios. I will post pictures later when I get home.

                  Comment


                  • #10
                    What slots do you have them installed in?

                    Thank you
                    GSKILL TECH

                    Comment


                    • #11
                      The board only has 4 slots for RAM. I have 2gb in each slot.

                      http://www.asus.com/websites/Global/...ZlIrgn_500.jpg

                      Black and Orange Slots

                      Comment


                      • #12
                        Try each kit in the black slots, use these settings:

                        DDR3-1333 8-8-8-24 1.50V.

                        Let me know the results of each kit.

                        Thank you
                        GSKILL TECH

                        Comment


                        • #13
                          I will try that.

                          Here is a picture of the timings I have been running.

                          https://docs.google.com/document/d/1...mo/edit?hl=en#

                          Comment

                          Working...
                          X