I have 2 different sets of memory that require different voltage settings at 1600mhz. Before I install my question would be is there anyway to set in the bios 2 different dram voltage settings. The Gskill requires only 1.5 to 1.55 where as the kingston requires 1.7 to 1.8 and they are running on a P7P55D EVO motherboard.
I have a set of G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL
and I also have a set of Kingston HyperX 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model KHX1600C9D3K2/4G
I bought the Kingston thinking that my gskill memory was defective and I found out that was not the case.
I have a set of G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL
and I also have a set of Kingston HyperX 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model KHX1600C9D3K2/4G
I bought the Kingston thinking that my gskill memory was defective and I found out that was not the case.
Comment