Hi Rob,
thanks again for your help. I tested a lot the last days and in the meantime I thought I got it but no go. The system runs fine for a whole day, even after rebooting. But then the next after it was powered off, the system is all of a sudden unstable. I also had to clear all CMOS values once because it didn't POST after experimenting with some settings. My latest and most promising settings are:
I don't know what else I could do to get it stable. Since I depend on a stable pc, I'll take out 4gb and let it work with just 4gb.
thanks again for your help. I tested a lot the last days and in the meantime I thought I got it but no go. The system runs fine for a whole day, even after rebooting. But then the next after it was powered off, the system is all of a sudden unstable. I also had to clear all CMOS values once because it didn't POST after experimenting with some settings. My latest and most promising settings are:
Code:
CPU NB VID Control 1.4V Memory Clock x5.33 1066MHz DCTs Mode Unganged CAS# latency 9T RAS to CAS R/W Delay 9T Row Precharge Time 9T Minimum RAS Active Time 24T 1T/2T Command Timing 2T TwTr Command Delay 5T Trfc0 for DIMM1 300ns Trfc2 for DIMM2 300ns Trfc1 for DIMM3 300ns Trfc3 for DIMM4 300ns Write Recovery Time 10T Precharge Time 5T Row Cycle Time 33T RAS to RAS Delay 4T
Comment