Hello.
Help with a problem. Here such configuration.
Asus ASUS P8Z77-V Deluxe
Intel Core i7-3770K.
G.Skill RipjawsX <f3-17000cl9q-16gbxm> DDR-III DIMM 16Gb KIT 4*4Gb <pc3-17000> CL9.
As a result the computer normally starts only on frequency of memory to 2000. Frequency of the processor didn't increase.
The XMP profile was loaded.
that became.
1. Bios on the motherboard ? 1504 is updated
2. Tension of DRAM = 1.75 (what here the maximum side-altar increased?)
3. Increased tension of VССIO =1.15
4. Tension of VCCSA =1.1 increased
5. Memory delays increased.
As a result the computer joins, the light-emitting diode of memory and a computer burns is switched off. And so around.
But it is necessary to remove 2 pieces of memory, the computer turns on normally on frequency of memory to 2400 without a raising of any above the described tension.
With 4 pieces of memory the computer doesn't pass inclusion.
WHAT can I make?
Help with a problem. Here such configuration.
Asus ASUS P8Z77-V Deluxe
Intel Core i7-3770K.
G.Skill RipjawsX <f3-17000cl9q-16gbxm> DDR-III DIMM 16Gb KIT 4*4Gb <pc3-17000> CL9.
As a result the computer normally starts only on frequency of memory to 2000. Frequency of the processor didn't increase.
The XMP profile was loaded.
that became.
1. Bios on the motherboard ? 1504 is updated
2. Tension of DRAM = 1.75 (what here the maximum side-altar increased?)
3. Increased tension of VССIO =1.15
4. Tension of VCCSA =1.1 increased
5. Memory delays increased.
As a result the computer joins, the light-emitting diode of memory and a computer burns is switched off. And so around.
But it is necessary to remove 2 pieces of memory, the computer turns on normally on frequency of memory to 2400 without a raising of any above the described tension.
With 4 pieces of memory the computer doesn't pass inclusion.
WHAT can I make?
Comment