Motherboard: Gigabyte X48-DQ6 BIOS version F8D
Memory G.Skill F2-8500CL5D-4GBPK
CPU: E8600
CPU is OC to 4.0 GHZ by raising CPU Host Frequency from of 333 to 400, and setting System Memory Multiplier to 2.66D
PCI Express frequency set to 100
C.I.A.2 Disabled
Performance Enhance Disabled
Standard Timing Control is set at 5-5-5-15
I'm pretty sure those are all the above are the right settings correct?
But i have no idea what the correct settings are for anything under Advanced Timing Control, they are:
ACT to ACT Delay (tRRD)
Rank Write to READ Delay
Write to Precharge Delay
Static tRead Value
Static tRead Phase Adjust
Command Rate(CMD)
What are the correct and optimal values for these settings?
Also should anything be changed under Clock Driving and Skew Control?
What about voltages. I seem to remember that DDR2 Overvoltage Control should be set to +0.25V in the documentation, but I'm not 100% sure about this.
Any other voltages that should be changed? I do not plan to do any further overclocking.
I would post BIOS screen shots but my account does not allow attachments.
Thank in advance for your help.
Memory G.Skill F2-8500CL5D-4GBPK
CPU: E8600
CPU is OC to 4.0 GHZ by raising CPU Host Frequency from of 333 to 400, and setting System Memory Multiplier to 2.66D
PCI Express frequency set to 100
C.I.A.2 Disabled
Performance Enhance Disabled
Standard Timing Control is set at 5-5-5-15
I'm pretty sure those are all the above are the right settings correct?
But i have no idea what the correct settings are for anything under Advanced Timing Control, they are:
ACT to ACT Delay (tRRD)
Rank Write to READ Delay
Write to Precharge Delay
Static tRead Value
Static tRead Phase Adjust
Command Rate(CMD)
What are the correct and optimal values for these settings?
Also should anything be changed under Clock Driving and Skew Control?
What about voltages. I seem to remember that DDR2 Overvoltage Control should be set to +0.25V in the documentation, but I'm not 100% sure about this.
Any other voltages that should be changed? I do not plan to do any further overclocking.
I would post BIOS screen shots but my account does not allow attachments.
Thank in advance for your help.
Comment