Hi Gskill and all the community,
Finally purchased these modules after a lot of research. I have trouble running these stable at default bios settings. Iv been running on a 24/7 stable OC for well over 3 years. I ran some stress tests just before i switched memory setup just to make sure .
3.2ghz 8X multiplier e6600 (temps 20C idle - load under 55C)
FSB at 400(1600) rampage formula X48 (temps under 40C load)
Everything else is stock clocks and voltages. I dont plan on overclocking these modules am very happy with 1200mhz at 5-5-5-15. Ran memtest and no errors. Pretty solid product i have to say. Am sure its just a small sub timing tweak and a bit more voltage?
If you guys could help me out with some sub timings and some X48 memory settings like skews and what not. I'd greatly appreciate it. I am somewhat tech savy so feel free to get all technical
The memory modules are in the white slots incase anyone was wondering ( suppose to be optimal channels for 1200mhz )
Finally purchased these modules after a lot of research. I have trouble running these stable at default bios settings. Iv been running on a 24/7 stable OC for well over 3 years. I ran some stress tests just before i switched memory setup just to make sure .
3.2ghz 8X multiplier e6600 (temps 20C idle - load under 55C)
FSB at 400(1600) rampage formula X48 (temps under 40C load)
Everything else is stock clocks and voltages. I dont plan on overclocking these modules am very happy with 1200mhz at 5-5-5-15. Ran memtest and no errors. Pretty solid product i have to say. Am sure its just a small sub timing tweak and a bit more voltage?
If you guys could help me out with some sub timings and some X48 memory settings like skews and what not. I'd greatly appreciate it. I am somewhat tech savy so feel free to get all technical
The memory modules are in the white slots incase anyone was wondering ( suppose to be optimal channels for 1200mhz )
Comment