Hi,
My motherboard is GA-MA790GP-DS4H
http://www.giga-byte.com/Products/Mo...A-MA790GP-DS4H
CPU – Phenom II X4 965
RAM - F2-8500CL5D-4GBPK
First I have the same memory kit and one of the sticks worked just fine at 1066 but the other can’t run either at 800 or 1066. So I change the kit with new one and now two sticks works only in 800Mhz together or one by one.
So there is no way to go at 1066Mhz for the memory. In Prime95 in Windows 7x64 or XPx32bit crash in the beginning or sometimes blue screens.
I try this in BIOS with different combinations of DIMM slots, try bios F5, F6 and the last F7B but always crash:
CAS# latency - 5T -6T
RAS to CAS R/W Delay - 5T -6T
Row Precharge Time - 5T -6T
Minimum RAS Active Time - 15T -18T
1T/2T Command Timing - 2T
TwTr Command Delay - 4T
Trfc0 for DIMM1 - 127ns - 195ns
Trfc2 for DIMM2 - 127ns - 195ns
Write Recovery Time - 8T
Precharge Time - 3T
Row Cycle Time - 24T -33T -42T
RAS to RAS Delay - 4T
DDR2 Voltage to 2.1V
Northbridge Volt Control 1.2V
Please help me
My motherboard is GA-MA790GP-DS4H
http://www.giga-byte.com/Products/Mo...A-MA790GP-DS4H
CPU – Phenom II X4 965
RAM - F2-8500CL5D-4GBPK
First I have the same memory kit and one of the sticks worked just fine at 1066 but the other can’t run either at 800 or 1066. So I change the kit with new one and now two sticks works only in 800Mhz together or one by one.
So there is no way to go at 1066Mhz for the memory. In Prime95 in Windows 7x64 or XPx32bit crash in the beginning or sometimes blue screens.
I try this in BIOS with different combinations of DIMM slots, try bios F5, F6 and the last F7B but always crash:
CAS# latency - 5T -6T
RAS to CAS R/W Delay - 5T -6T
Row Precharge Time - 5T -6T
Minimum RAS Active Time - 15T -18T
1T/2T Command Timing - 2T
TwTr Command Delay - 4T
Trfc0 for DIMM1 - 127ns - 195ns
Trfc2 for DIMM2 - 127ns - 195ns
Write Recovery Time - 8T
Precharge Time - 3T
Row Cycle Time - 24T -33T -42T
RAS to RAS Delay - 4T
DDR2 Voltage to 2.1V
Northbridge Volt Control 1.2V
Please help me
Comment