Hey everyone. JUST got this ram today and I'm having some issues. I can't seem to get the ram to go more than 800 (board supports 1066).
I followed some guides and tried manually setting the BIOS (most recent update as well) to these settings:
DDR2 - 1066
TCL - 5
TRCD - 5
TRP - 5
TRTP - 5
TRAS - 15
TRC - 24
TWR - 8
TRRD - 4
TWTR - 4
DRAM - 2.1v
HT Volt - 1.4v
NB Volt - 1.2v
all that did was cause my system to not boot. I had to pop open the case and reset the BIOS several times. While it's set to default, my system runs fine, but ram is only detected at 800. While I'm fine with the ram running at 800, I'd prefer for my system to get the full performance out of the RAM
I followed some guides and tried manually setting the BIOS (most recent update as well) to these settings:
DDR2 - 1066
TCL - 5
TRCD - 5
TRP - 5
TRTP - 5
TRAS - 15
TRC - 24
TWR - 8
TRRD - 4
TWTR - 4
DRAM - 2.1v
HT Volt - 1.4v
NB Volt - 1.2v
all that did was cause my system to not boot. I had to pop open the case and reset the BIOS several times. While it's set to default, my system runs fine, but ram is only detected at 800. While I'm fine with the ram running at 800, I'd prefer for my system to get the full performance out of the RAM
Comment