Friends, probably a simple answer but about now my brains are lagging behind! having a few issues with new build using old hdd and os(w7pro).. MSI 970A-G46 mb and 4x4Gb of ddr3 GSkill F3-14900CL9D-8GBSR Sniper. on startup have a single 'beep' code, check memory. downloaded memtest86 v4.20 auto installer usb and started running with one stick in #1 slot. 'settings' shows 320Mhz DDR640/cas: 1-3-3-3/DDR2 64 bit... and 4Gb...going back into bios shows RAM as DDR3 1600(default limit for 1866 will show only 1600 i know).. but why is memtest86 showing such a setting? trying to wrap my head around this and getting nowhere.. (other issues were no access to setup in old build, hence new build; new build worked fine for several days, now this morning didn't let me into bios with all new except hdd/os. cleared cmos and got back in; now ram 'beep' code)... any ideas would be greatly appreciated.. thanks reed
.
.
Comment