Sharing my Sensor Panel

[NIGHT]

I finished modifying the screen today. 1024 by 600 G.Skill WigiDash

[NIGHT]

my Sensor Panel

[emissary42]

Thanks for sharing it.

P.s. Just curious, did you compare the performance of your current configuration to one with lower memory frequency and UCLK=MCLK? It is kinda rare to see someone end up at DDR5-7200 with an AMD setup.

[NIGHT]

No. I compared it to my old one.

[emissary42]

Comparing the numbers of different platforms is kinda pointless sadly, since the architectures and optimizations are way too different.

I would recommend giving a synced setup a try, for example at DDR5-6400 if your system can handle that. Then see for yourself which one you prefer, in terms of real world performance. On AM5 it usually takes more than DDR5-7200, until a 2:1 configuration comes out on top (YMMV).

[NIGHT]

Ok I have (2x16GB) DDR5 6000 CL34 we will compare

[emissary42]

You don't need to swap the memory, just save your config as a profile in the UEFI and then "underclock" your current kit.

Regardless, a manual overclock will outperform either EXPO, quite handily if done properly.

[NIGHT]

Both devices have been tested.

horizon forbidden west ultra settings
DDR5-6400
fps 166

[NIGHT]

DDR5-7200
fps 166 to 167

[NIGHT]

Intel Core i9-14900KF
DDR5-8200
fps 169 to 170