Announcement

Collapse
No announcement yet.

Sharing my Sensor Panel

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • NIGHT
    replied
    Intel Core i9-14900KF
    DDR5-8200
    fps 169 to 170

    Leave a comment:


  • NIGHT
    replied
    DDR5-7200
    fps 166 to 167

    Leave a comment:


  • NIGHT
    replied
    Both devices have been tested.

    horizon forbidden west ultra settings
    DDR5-6400
    fps 166


    Leave a comment:


  • emissary42
    replied
    You don't need to swap the memory, just save your config as a profile in the UEFI and then "underclock" your current kit.

    Regardless, a manual overclock will outperform either EXPO, quite handily if done properly.

    Leave a comment:


  • NIGHT
    replied
    Ok I have (2x16GB) DDR5 6000 CL34 we will compare

    Leave a comment:


  • emissary42
    replied
    Comparing the numbers of different platforms is kinda pointless sadly, since the architectures and optimizations are way too different.

    I would recommend giving a synced setup a try, for example at DDR5-6400 if your system can handle that. Then see for yourself which one you prefer, in terms of real world performance. On AM5 it usually takes more than DDR5-7200, until a 2:1 configuration comes out on top (YMMV).

    Leave a comment:


  • NIGHT
    replied
    No. I compared it to my old one.

    Leave a comment:


  • emissary42
    replied
    Thanks for sharing it.

    P.s. Just curious, did you compare the performance of your current configuration to one with lower memory frequency and UCLK=MCLK? It is kinda rare to see someone end up at DDR5-7200 with an AMD setup.

    Leave a comment:


  • NIGHT
    replied
    my Sensor Panel

    Attached Files

    Leave a comment:


  • NIGHT
    started a topic Sharing my Sensor Panel

    Sharing my Sensor Panel



    I finished modifying the screen today. 1024 by 600 G.Skill WigiDash

Working...
X