I am ABLE to load the XMP profile for the ram kit, but unable to run it stable enough to install windows or even run windows. I would have to run the sticks at JEDEC specs of 4800 Mhz 40-40-40-76 1.1V to even be able to install windows successfully and to run the system. Any attempt to run the system at XMP profile at 6000Mhz 40-40-40-76 1.3V would cause the system to become unstable and BSOD and/or corrupt windows. The XMP profiles also do not pass the MemTest86 test built into my motherboard (ROG MAXIMUS Z690 APEX /w ver. 0702 BIOS.). I was told to raise the voltages to get it stable but even when I bump it up a little bit and test for stability it still fails. The CPU and GPU are NOT overclocked. Any tips to get it work stable on the rated 6000Mhz 40-40-40-76 would be appreciated.
CPU: INTEL i9-12900K
MEMORY: G.SKILL Trident Z5 RGB Series 32GB (2 x 16GB) Model F5-6000U4040E16GX2-TZ5RK
MOTHERBOARD: ROG MAXIMUS Z690 APEX (BIOS Ver. 0702)
PSU: Corsair HX1200
CPU: INTEL i9-12900K
MEMORY: G.SKILL Trident Z5 RGB Series 32GB (2 x 16GB) Model F5-6000U4040E16GX2-TZ5RK
MOTHERBOARD: ROG MAXIMUS Z690 APEX (BIOS Ver. 0702)
PSU: Corsair HX1200
Comment