No announcement yet.

F3-1866C10Q-32GAB + Asus Sabertooth 990FX R2.0 + AMD 8350FX

  • Filter
  • Time
  • Show
Clear All
new posts

  • F3-1866C10Q-32GAB + Asus Sabertooth 990FX R2.0 + AMD 8350FX

    I just wanted to post my DRAM settings for this board; it took a while to become stable at the specified settings. I'll let the screenshots to the talking.

    I'm going to add the UEFI screen grabs in just a few moments. Will post those below as well.

  • #2


    • #3


      • #4
        Thanks for sharing, this should help many

        Pls offer comments on support I provide, HERE, in order to help me do a better job here:



        • #5
          I want to add some information to the above.

          If your motherboard doesn't recognizes the full 32Gb kit. But you will see only 16Gb or 24Gb. Do a BIOS reset. take out 3 of the dimms. Leave only one dimm on the first slot (A1 slot).

          After this boot strait into the Bios. Be sure it tells you there is 8Gb. If so push the MEM OK button on the upper left side of the motherboard. Let it Reboot into the BIOS again and shut down the PC.

          Putt in the other 3 dimms and boot the PC again. Now it should say there is 32GB. If not you should do it over again or your kit has a defect.

          I used this method and worked perfect for me. So enjoy.