Tried to, am not able to get it to boot, as I said the one time it did boot I did get those timings in there, however it only showed 16 GB RAM. I did not leave it on for very long to check stability, perhaps I will if I get it to again.
One questions, these timings do I just start from the top of the 'secondary timings' and input those numbers from there down? I notice there are 6 sets of numbers given, however in the BIOS there are a total of 7 inputs under 'secondary timings'?
i.e.
DRAM RAS# to RAS# Delay = 6
DRAM REF Cycle Time = 300
DRAM WRITE Recovery Time = 16
DRAM Read to Pre Time = 7
DRAM Four Act Win Time = 20
DRAM Write to Read Delay = 7
DRAM Write Latency = Auto
Would this be correct?
One questions, these timings do I just start from the top of the 'secondary timings' and input those numbers from there down? I notice there are 6 sets of numbers given, however in the BIOS there are a total of 7 inputs under 'secondary timings'?
i.e.
DRAM RAS# to RAS# Delay = 6
DRAM REF Cycle Time = 300
DRAM WRITE Recovery Time = 16
DRAM Read to Pre Time = 7
DRAM Four Act Win Time = 20
DRAM Write to Read Delay = 7
DRAM Write Latency = Auto
Would this be correct?
Comment