If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Hi guys, I just received my memories together with a Turbulence II memory fan.
It?s damnly useful and well made, but...
How do I turn these leds off?
Thanks in advance.
Crosshair V Formula
AMD Budozer 8150 3.6ghz x 8
HD 6850 XFX
HAF 932
8gb G-skill Ripjaws 2200
Turbulence II
Microsoft Wireless Combo 5000 keyboard/mouse
Windows 7 premium x64
Tv / monitor SAMSUNG 37"
To be honest not sure if you can, think you would have to open it up and see if the lights are wired separate from the fans, I've got three or four of them sitting, but I get calls for things like those just to add color and looks, so don't really want to pop one open, I'll drop a note to GSkill Tech and see if they have a way
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
It's not separated. Both wires are connected in a green electronic board.
It's not needed to "open" it. Just remove the green adesive and you'll see the board.
Crosshair V Formula
AMD Budozer 8150 3.6ghz x 8
HD 6850 XFX
HAF 932
8gb G-skill Ripjaws 2200
Turbulence II
Microsoft Wireless Combo 5000 keyboard/mouse
Windows 7 premium x64
Tv / monitor SAMSUNG 37"
Yeah, pulled one to take a look, only two wires to the Molex connector, the outside wire is power the inner on the molex is a ground, so it's a single source hot
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Comment