F3-10666CL7Q-16GBXH and ASUS Maximus IV Extreme

[iggy1965]

Bought this set brand new
\
Other hardware involved:

2x Intel SSD RAID 0
2x Seagate HD RAID 1
Pioneer Blueray
radeon Crossfire
MS Mouse and KB (wireless)

Firmware is the latest for all hardware including the MB and Videocard

After a while the system locks up but no ?blue screens?

Bios setting is XMP 7/7/7/21/2/1.5
and RAM voltage is 1.58V (1.52V measured'

Still halting

What am I doing wrong. Could someone help

thx

Iggy

[Tradesman]

Try raising VCCIO to 1.14

[iggy1965]

VCCIO is raised till 1.14375

[Tradesman]

If you have the latest BIOS may want to try simply manually loading the base timings, CR and DRAM voltage rather than letting the mobo set it, even if it appears the mobo is setting it right....if still problems try running Memtest on each stick individually (I'd start with simply 4-5 passes, since it is so time consuming, and see if any problems indicated)

[iggy1965]

No more crashes for the last 4 hours

[Tradesman]

Sounding good!

[iggy1965]

Damn....

2 more crashes. 1 after a powered computer after a whole night of doing nothing and 1 after 5 houres of use with Chrome and MS Outlook

All settings done by hand

[iggy1965]

Memtest x86 4.0a just stalled during the test

[Tradesman]

If you could post your BIOS settings, maybe we'll see something out of whack

[iggy1965]

CPU installed Intel 2600 3.4GHz

Bios setup

CPU target freq: 3.8GHz
XMP enabled
DDR3-1333-7-7-7-21-2N-1.50V
BCLK 100.0
Turbo all cores
PLL overvoltage Auto
mem Freq DDR3-1333
xtrem tweak enabled
EPU disabled
DRAM timing 1 level 7-7-7-21-2N all other levels on Auto

CPU ratio auto

CPU voltage 1.17 manual
DRAM Volt 1.50
Data ref auto
ctrl auto
Data ref auto
CSA Volt 1.005V
CIO Volt 1.144V
CPU PLL Volt 1.779Volt
PCH Volt 1.058 Volt
NF200 1.204 Volt

[iggy1965]

Is there someone with a solution???????

[iggy1965]

Anyone????????

[Tradesman]

Might try DRAM at 1.55 and VCCIO at 1.18

[GSKILL TECH]

Test one module at a time to see if one may be bad causing problems.

Thank you
GSKILL TECH