New build and IE crashes w/ memory fault

[VAeric]

Hi-
I have a brand new build where the OS loads without issue (Win7 x64 Home Prem) but once done, IE crashes repeatedly throwing a memory error. Have not experienced a BSOD and no other software is loaded. The issue occurs in both instances - just after installing Win7 from disk, and after letting all updates install.

The Error:
- Starts with a pop-up: "Out of memory at line: X" when connecting to various sites
- Followed by: "IE has stopped working -> Close Program or Check online for Solution"
- App EventLog states fault was in MSHTML.DLL

I have done to the following to see if i can isolate a MB or Memory or Disk issue:
- reloaded Windows on a different drive connected to a different sata port
- moved the dimm to the 2nd dimm slot
- ran Memtest86 overnite while the dimm was in both slots (no errors reported)
- Kept generic Win7 video drivers; installed video drivers that accompanied MB; installed latest ATI drivers (IE crashed in all 3 instances).
- loaded Firefox (version 7 then 10) and it crashed

Config:
MB: Biostar A800G+ (NB:AMD 880G; SB:AMD SB710; integrated ATI Radeon HD 4250)
CPU: AMD ATH II X3 450 3.2G AM3 RT
MEM: F3-10666CL9S-4GBNT
DSK: Seagate ST31000528AS


Any thoughts what else I could do?

[flearider]

whats the psu ? and have you checked the voltages ?
made sure bios and drivers are up to date ?

[VAeric]

Also:
Have not attempted any OC of cpu or memory in BIOS - left at stock config.

BIOS:
AMIBIOS v. 08.00.16
Build Dt: 09/21/11

DRAM Timing Config:
Memory Clock Mode: AUTO
DRAM Timing Mode: AUTO
Memory Clk: DDR3-1333
Tcl: 9 CLK
Trcd: 9 CLK
Trp: 9 CLK
Tras: 24 CLK
Trrd: 4 CLK
Trc: 33 CLK
CR: 1T

CPU Frequency: 200

Memory Config:
Bank Interleaving: Auto
Channel Interleaving: XOR of Address
Memory Hole Remapping: Enabled.

[Tradesman]

Can't find your mobo on the net, can try w/ CR at 2T and raise CPU/NB voltage + .03

[VAeric]

Guess it would help to put the correct MB in... Biostar A880G+

Will try making the change to CR and voltage.

-Flearider
PSU is Aspire ATX-AS420W 12v and yes, drivers and bios is current

[Tradesman]

If the above doesn't do it, you can check you have the latest BIOS:

http://206.108.48.60/app/en/mb/intro...S_ID=492&tab=2

Also if problems is CPU/NB freq at 2000 or so