Asus Rampage Extreme socket 775 and Gskill F3-17000CL9D-8GBXM?

[xavist]

Hello, I have a Asus Rampage Extreme socket 775 whith Intel Quad Core Q9650 and I will have this modules memory soon: G-Skill F3-17000CL9D-8GBXM.
Please, can you tell me if this memory kit working fine whith the motherboard?
If can I overclock to 2000 MHz ore more whithout problem?
I have also a Intel Quad Core Q6600 so sames questions whith this CPU?
Thx.

[Tradesman]

They should run up to at least 2000, don't think you'll hit 2133, and it will take a healthy OC on the 9650, 4GHz or so at native multiplier....at 2000 can prob tighten timings to 9-10-8-28 or so

[xavist]

They should run up to at least 2000, don't think you'll hit 2133, and it will take a healthy OC on the 9650, 4GHz or so at native multiplier....at 2000 can prob tighten timings to 9-10-8-28 or so

Hello, thanx you for your fast reply.
Please can you tell about a Intel Quad Core Q6600 whith asus rampage extreme 775 and G-skill F3-17000CL9D-8GBXM ?
Thx and best regards.

[xavist]

Hello again,

1-What about a QX9750 multiplier unlocked Rev EO whith same MB (Asus Rampage Extreme Socket 775) and memory (Gskill F3-17000CL9D-8GBXM)?

-2 You said "and it will take a healthy OC on the 9650, 4GHz or so at native multiplier"
So if I understand what you mean my best OC whith 9650 will be 4 GHZ and only works whith the native multiplier whith Gskill F3-17000CL9D-8GBXM and X48 chipset?
I said that because I did an OC whith that CPU on a Asus Rampage Formula socket 775 DDR2 and it took 4.4 GHz whith OCCT during one hour.
You can look my sreenshot here

[Tradesman]

Just meant at least to 4.0, if you can hit 4.4, even better and might be able to run the sticks faster than 2000.....The Q6600, just not positive about, I've run 1866 sticks with a G0 at 4 GHz

[xavist]

Hello again What are you suggest about tighten the timing at 1866 MHz whith Q6600, Asus rampage extreme 775 and Gskill F3-17000CL9D-8GBXM ?
Thx and best regards.

[Tradesman]

With the 6600 might get to CL8 at 1866, but prob CL9, some will depend on how high you go with the DRAM and NB voltage

[xavist]

Hello again, What are you suggest for Dram and NB voltage for CL8?
Is this timings will be good? 8-10-8-28 @1866 MHz
Thx and Best regards.

[Tradesman]

Timings prob good, though may have to loosen if need be, start with base voltage on the DRAM and raise it if need be, on the NB maybe start at 1.3

[xavist]

Hello again I will have a new CPU soon.
It is a Intel QX9750 Rev E0.
Can you tell me if i can OC my memory at 2000MHz or more with the QX9750 ?
At this time I Have a Q6600 and my best OC whith this CPU is about 3.4 Ghz whith 1692 Mhz timings auto 7-11-10-28 whith Gskill F3-17000CL9D-8GBXM. What timings do you suggest at this frequency (1692 Mhz) and whith the Q6600?

[xavist]

Hello again I will have a new CPU soon.
It is a Intel QX9750 Rev E0.
Can you tell me if i can OC my memory at 2000MHz or more with the QX9750 ?



At this time I Have a Q6600 and my best OC whith this CPU is about 3.4 Ghz whith 1692 Mhz timings auto 7-11-10-28 whith Gskill F3-17000CL9D-8GBXM. What timings do you suggest at this frequency (1692 Mhz) and whith the Q6600?

[GSKILL TECH]

You should be able to, the QX CPU is much better, but in the end it mainly depends on your overclocking abilities.

For DDR3-1692, it should be around 7-9-9-24 or 7-10-9-24

Just work your way down and find out, every kit is slightly different, so we can only guess.

Thank oyu
GSKILL TECH