Announcement

Collapse
No announcement yet.

F3-12800CL9T-12GBRL and Rampage 3 Formula

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F3-12800CL9T-12GBRL and Rampage 3 Formula

    Hey there, I have just finished building my computer. I have a rampage 3 formula with an intel core i7 960. I purchased the F3-12800CL9T-12GBRL kit and the timings are rated at 1600. When I go to the bios they are set to 1066. So to get the 1600 timings I set the profile to X.M.P. Once I do this I can never get the computer to boot. It just says overclocking failed.

    Things I have tried:

    1.) Set X.M.P. (failed)

    2.) Set speed and timings manually (failed)

    3.) Set DRAM Bus Voltage to 1.64 (failed)

    I did test each stick individually and none of them were stable at 1600. I can only get them to 1333.

    Is there any safe way to get them at there rated speeds or do I have to RMA them?

    Fast reply would be greatly appreciated thanks!

  • #2
    Try manual settings. Are you using the latest version BIOS?

    Manually set DRAM Frequency, timings, and voltage in BIOS.

    Thank you
    GSKILL TECH

    Comment


    • #3
      thank you very much, Had a feeling it was because of the BIOS. Once i got a chance to do that I did. Everything is running nice and tight. LOVE G SKILL!!!!

      Comment


      • #4
        Glad to hear it, Enjoy!


        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

        Tman

        Comment

        Working...
        X