trying to get to 7-7-7-?-1t timings

[Jag1]

hey all,

I have a amd 1100t with gskill ripjaws F3-12800CL9-4GBRL currently running at 1600, with 9-9-9-24-1t timings @1.5 voltage i would like to get to 7-7-7-?-1t not sure what other number should be. when i drop to 8-8-8-24-1t i get bsod. any help would be appreciated ty in advance

Jag

oh ya

Mobo asus m4n98td evo
ocz 1200w power supply

[GSKILL TECH]

Try 7-8-7-24 1.65V, it may not be fully capable. Also, don't forget CPU-NB Frequency should be 2400MHz.

Thank you
GSKILL TECH

[Jag1]

any advice on cpu/nb voltage mine is still on auto, which i think is effecting the attempt at this cause i couldnt boot at those settings

[NemesisChild]

any advice on cpu/nb voltage mine is still on auto, which i think is effecting the attempt at this cause i couldnt boot at those settings

CL7 timings is a long shot, you may have to live with 8-8-8-24@ 1.65v.

Try 1.20-1.25v for CPU/NB voltage.

[Jag1]

Tried going with the 8-8-8-24 timings dram volt 1.64 and cpu/nb volt up to 1.25 and i couldnt get past the splash screen with out failing... currently at 8-9-8-22-33 cpu/nb back on auto dram volt 1.64.. any thing else u can think of that i am missing? cpu/nb freq is 2400 240 x 14.5 so running at 3.3 stock freq for cpu.. confused i have seen other posts with ppl getting timings lower

[Tradesman]

Are they getting CL7 with the same set of sticks or are they running these at 1333 (might possibly get them to CL7 at 1333). Reason I ask is there are other 1600 sets that stock are CL7 or CL8

[Jag1]

i am pretty sure with these same sticks i will go back and verify this for sure.

[Tradesman]

All right, because they have a number of sets of Ripjaws and they range , stock, from CL7 to CL9, but haven't seen anyone I remember getting the CL9 sets to run at CL7 except maybe at lower speeds, not at 1600.

[GSKILL TECH]

Don't over volt too much...

Try using BCLK 200, and set NB Frequency to 12X.

Thank you
GSKILL TECH