rip jaws X problems with p8h67-v

[jonburf]

Hi, I am in need of help with my new setup
I am using a
P8H67-v B3 rev motherboard
i5-2500k
2 x 4GB G.Skill RipJaws X (F3-12800CL9D-8GBXL)
WD 500GB HDD

My problem.
I have no problem running the machine with one stick of the 4GB installed, but when I add the seconde, It sometimes starts up and then after a phew seconds switches back off and cycles. then other times it starts up and recognises the memory in the bios and boots. then when it gets to "windows starting" it hangs and restarts.
I then remove the second stick and all is well again.

It's really annoying me now.
Any help you could give would be great.
I have ready many threads on it but I don't think my problem is the same.

Cheers

Jonburf

[Tradesman]

Do you have the latest BIOS? also are the sticks on AUTO, Set up manually or did you enable/use XMP - should be fine under XMP

[jonburf]

Hi, thanks for your reply.
I have
Bios 0712 the latest.
in AI-tweaker i have
Ia overclock tuner = manual
memory frequency 1333
and in DRAM timing control I have all set to auto.

any help would be great.

Thanks


jon

[GSKILL TECH]

Sounds like it may be a problem with the motherboard if one slot is not working properly.

Thank you
GSKILL TECH