Overclocking issues - F3-12800CL8D-8GBXM - P8Z68V-Pro

[ocococ]

I'm trying to overclock my rig:

2600K
P8Z68V-Pro
F3-12800CL8D-8GBXM
Corsair H60


Current settings:
4.5Ghz (45x)
Vcore - 1.310
Memory Freq - 1333 (dropped it down to start)
VCCIO - Auto
DRAM Volts - 1.5
8-8-8-24

With these settings, I was able to run 24hrs stable using Prime95, temps stay under 70

But when I try to set the RAM back up to 1600, it keeps getting BSOD.
I've tried these and it didn't work:
VCCIO 1.0625, DRAM Volts 1.5
VCCIO 1.05625, DRAM Volts 1.5125

I'm getting BSOD 101 errors.

Any ideas? Thanks.

[Tradesman]

If it's hardware, I would lean to the vCore a bit low, might try 1.32, could also be a BIOS bug (from the 101 error), a driver problem, or possibly a program you have i.e. a virus program, basically it's a processor calling to another for and not getting a timely response

[ocococ]

folks on another forum suggested I installed the rams into the wrong slots, so I moved them from A1 and A2, to A2 and B2. I also set it to XMP for now and re-running the test.