F3-12800CL9D-4GBRL for ASUS M4A88TD-M EVO/USB3

[rbp45]

My config

CPU- AMD PhenomII X4 965 BE
MOBO- ASUS M4A88TD-M EVO/USB3
RAM- F3-12800CL9D-4GBRL

To day I purchage F3-12800CL9D-4GBRL and instal , till now no prblem with following settings in my bios

DRAM Frequency- 1333MHz

DRAM Timing Config
DRAM Cas#Lat 9[8CLK]
DRAM Ras# Pre Time 9[8CLK]
DRAM Ras# Act Timing24[24CLK]
Remaining in this menu Auto

DRAM Voltage 1.5 [Auto]

Is this seting wrong to me ? I dont know overclock or anything . This is first time set in my bios.
Now how can I "Set CPU Host/Bus Frequency to 240 (this will overclock the memory frequency to DDR3-1600".
Is it mean- CPU/NB Frequency 2400MHz in bios.
I could not find out "CPU Host/Bus Frequency to 240 " in bios.

[rbp45]

My current bios 1702

[rbp45]

Can any one help me
My BSOD start from 2hours with following setiing

DRAM Frequency- 1333MHz

DRAM Timing Config
DRAM Cas#Lat 9[8CLK]
DRAM Ras# Pre Time 9[8CLK]
DRAM Ras# Act Timing24[24CLK]
Remaining in this menu Auto

DRAM Voltage 1.5 [Auto]

[Tradesman]

If you don't want to OC and leave the sticks at 1333, then try 8-8-8-24, CR (Command Rate) at 2N or 2T

[rbp45]

Due to lack of knowledge to "Bios Configuration & settings, and overclock", I opt for this easy methods from "AMD CPU +G.skill DDR3-1600". If required to overclock to stable my P/C than welcome.
Now my problem is not boot so that need to press "MEM OK switch (at MOBO)" to reboot, and BSOD.
Now what should I do to stable my P/C ?

[rbp45]

If you don't want to OC and leave the sticks at 1333, then try 8-8-8-24, CR (Command Rate) at 2N or 2T

My current settings in bios as follows

DRAM Frequency- 1333MHz

DRAM Timing Config

DRAM Cas#Lat 9[8CLK]
DRAM Ras# Pre Time 9[8CLK]
DRAM Ras# Act Timing24[24CLK]
Command Rate 2T [2T]

Remaining in this menu Auto

DRAM Voltage 1.5 [1.50000]

[Tradesman]

Is it stable?

[rbp45]

still unstable ASUS M4A88TD-M EVO/USB3 with F3-12800CL9D-4GBRL ,
but F3-12800CL9D-4GBRL makes stable in Intel config.
The couse of unstablity is MOBO FAULTY as I install different band Ram of 1333 MHz unable to boot, so I am going to RMA this MOBO.
Thanks

[Tradesman]

No problem, let us know what you think when you get the new mobo

[rbp45]

On July 23rd 2011 at 2-30 pm recevied new MOBO (different sl no ) from local service center of Asus, and install F3-12800CL9D-4GBRL with following setting . Now pass 48 hours running no problem.


1) Freq 1333, 8-8-8-24, CR (Command Rate) at 2T DRAM Volt 1.50v
2) Freq 1333, 9-9-9-24, CR (Command Rate) at 2T DRAM Volt 1.50v (no CPU Host/Bus freq to 240).

Both setting are stable. Now let me know which setting more safe.

[GSKILL TECH]

8-8-8-24 is perfect.

Thank you
GSKILL TECH

[rbp45]

THAANKS to you & Gskill.

[rbp45]

Blue screen start to-day at idle time and restart, shows in windows as follows

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF88004AC9359
BCP3: FFFFF88007EF4D10
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\073011-20623-01.dmp
C:\Users\user1\AppData\Local\Temp\WER-35193-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
--------------------------------------------------

Please give advice what to do

[Tradesman]

Either one is fine, running the CL8 (8-8-8-24) should provide a bit more performance wise

[rbp45]

My current setting in bios
Freq 1333, 8-8-8-24, CR (Command Rate) at 2T DRAM Volt 1.50v









is there need to more settings to stable my P/C, as I got blue-srcreen to-day mention above ?