I'm getting blue screens on the machine I've just built. Here is the config:
MB: GIGABYTE GA-890GPA-UD3H
CPU: AMD Phenom II x6 1100T Black Thuban 3.3GHz
Memory: 16G with four G.SKILL F3-1066CL9D-8GBRL
OS: Windows 7 64bit
I'm using Memetest 86+ (ver4.20) to test the memory. All the errors are in test #5 (block moving) and #8 (modulo 20) . Here are the results:
1. All 4X4G DDR3 on the mother board (16G): FAIL the tests 5 and 8
2. Each DDR3 on socket 1 (4G): PASS the tests 5 and 8
3. One DDR3 in socket 1 and one DDR3 in socket 3 (8G) : PASS the tests 5 and 8
4. One DDR3 in socket 2 and one DDR4 in socket 4 (8G): PASS the tests 5 and 8
Currently I'm using only 2 DDR3 in socket 1 and 3 and so far no blue screens. However I would like to use all the memory.
Any help will be very much appreciated.
MB: GIGABYTE GA-890GPA-UD3H
CPU: AMD Phenom II x6 1100T Black Thuban 3.3GHz
Memory: 16G with four G.SKILL F3-1066CL9D-8GBRL
OS: Windows 7 64bit
I'm using Memetest 86+ (ver4.20) to test the memory. All the errors are in test #5 (block moving) and #8 (modulo 20) . Here are the results:
1. All 4X4G DDR3 on the mother board (16G): FAIL the tests 5 and 8
2. Each DDR3 on socket 1 (4G): PASS the tests 5 and 8
3. One DDR3 in socket 1 and one DDR3 in socket 3 (8G) : PASS the tests 5 and 8
4. One DDR3 in socket 2 and one DDR4 in socket 4 (8G): PASS the tests 5 and 8
Currently I'm using only 2 DDR3 in socket 1 and 3 and so far no blue screens. However I would like to use all the memory.
Any help will be very much appreciated.
Comment