Help setting timings

[Cleanerxp]

Hi

I've got a problem setting timings.

My memos are [ Ripjaws-X ] F3-10666CL7D-8GBXH

I have a Mother Board Intel DH67BL (B3) with i5-2500 processor

My bios doesn't have XMP option and if I use "automatic" config it puts 9 instead of 7

So, I have to put manually but I need help to set up the correct timing

Here is a screenshot of the bios --> http://imageshack.us/photo/my-images/52/gedc0013q.jpg/

I?ll be very grateful if you could help me

[Tradesman]

Start with base timing 7-7-7-21, CR at 2T or 2N (N/T are interchangeable), and DRAM voltage at 1.5 can leave the rest at auto

[Cleanerxp]

Start with base timing 7-7-7-21, CR at 2T or 2N (N/T are interchangeable), and DRAM voltage at 1.5 can leave the rest at auto

Thank you

But what can I do if I can't leave the rest at auto??? what values should I assign it??

[GSKILL TECH]

Which ones do you need?

Thank you
GSKILL TECH

[Cleanerxp]

Which ones do you need?

Thank you
GSKILL TECH

I'm asking for

tRFC
tRRD
tWR
tWTR
tRTP
tRC
tFAW

[GSKILL TECH]

tRFC 74
tRRD 4
tWR 10
tWTR 5
tRTP 5
tRC 33
tFAW 20

Thank you
GSKILL TECH

[Cleanerxp]

Thank you!!

[Tradesman]

Let us know how thing go

[Cleanerxp]

it works good.

The problem now is that even though I set the CR configurations to 2T in the bios, other programs such as CPUz and Aida64 show me 1T. However, I believe the problem is with the motherboard now.

Thank you for the help

[Tradesman]

In the memory tab or SPD tab? Memory tab should should show as is in the BIOS?

[Cleanerxp]

My problem is the inconsistency between these two screenshots

Bios


Programs


This is why I am pretty sure the problem is the motherboard

[Tradesman]

Could be a fluke in the BIOS, do you have the latest BIOS? forgot to check when I got back here? If stable, prob not a big prob, might drop Intel tech support a line and ask if they have any input....have seen this happen before but haven't heard of any adverse effects

[GSKILL TECH]

Is it stable? If so, don't worry about it. Either way is fine.

Thank you
GSKILL TECH

[Cleanerxp]

Hi

I have the latest bios

And it's very stable, so I think it will be fine

Thanks G.Skill support!!

[Tradesman]

No problem, Enjoy!