F3-16000CL7D-4GBFLS Stability problem

[Seppie]

Hello all,

Ik have the 3-16000CL7D-4GBFLS with the current setup
Asus crosshair 4 Formula (Bios 1102)
AMD 1090t @ 4GHz (250x16)
H70 Cooled

Current settings are used in bios:
250 Bus
2500MHz NB
2000MHz HT

CPU Volt: 1.35
CPU-NB Volt: 1.25
HT Volt: 1.25
NB Volt: 1.25
DRAM Volt: 1.65

LLC CPU: Enable

Timings:
7-9-7-24 rest on auto.

Any tips on what to do now?

[DocBuzz]

4.0

to get mine to run at 4.0
CPU 16 X
FSB 250
Dram Freq. 2000
CPU/NB Freq. 3000
HT Freq 2000
CPU volts 1.44
CPU/NB Volts 1.38
dimm volts 1.66250
Dram timmings
7-9-8-24-40-1T

[DocBuzz]

3.76

I think this one is better
CPU 15X
FSB 250
Dram freq 2000
CPU/NB 3000
HT link 2000
CPU volts 1.390625
CPU/NB 1.3
CPU VDDA 2.53
Dram volts 1.66250
HT volts 1.2
NB volts 1.3
CPU Spread Spec. Disable
PCIE spread Disable
Dram timmings 7-9-7-24-40-1T
ZALMAN CNPS9900MAX-R 135mm cooler

[DocBuzz]

Temps

The 3.76 runnig under normal load @ 35 c

[Seppie]

Alright i will see what they end up with

got 1800MHz @ 7-9-7-24 stable

[Seppie]

Settings i used were ok its just that i needed to put the memory in the black slots instead of the C4F red slots.

Thanks anyway for the input!

[NemesisChild]

Same setup here, just built it about 10 days ago.
Also having problems getting 2000MHz stable, but haven't devoted a lot of time to it though.
First thing that I noticed is that your Vcore is low at 1.35v with a 4.0GHz overclock.
Right now, I'm at 4.056GHz stable with a Vcore of 1.46v, but testing daily with lower voltage.
Flare memory stable@ 1967MHz with 7-9-7-24-40-1T timings with this CPU overclock.

My next plan of attack to get 2000MHz stable is with higher NB frequency & voltage.

[Seppie]

Yeah i dont know either why i dont have problems with that low voltage but been running prime95 for like over 8 hours and still stable @ 49C 100% load

Hope it works out to get the flare stable @ 2000 7-9-7-24

[NemesisChild]

Yeah i dont know either why i dont have problems with that low voltage but been running prime95 for like over 8 hours and still stable @ 49C 100% load

Hope it works out to get the flare stable @ 2000 7-9-7-24

Woot, passed HyperPI 32M with Flare at 2000MHz@ 7-9-7-24-40-1T
Was pulling my hair out, just couldn't pass HyperPI with a number of different bios settings.
The key was moving the Flare modules to the black memory slots on the CH4.
Special thanks to you guys here and leeghoofd for his excellent Flare & CH4 reviews.

[GSKILL TECH]

Great, glad to hear you were able to get that working properly.

Thank you
GSKILL TECH

[NemesisChild]

Thanks, update:



Awesome memory, definitely recommended for the ASUS Crosshair IV Formula & Extreme.

[Tradesman]

Thanks for the comeback