Announcement

Collapse
No announcement yet.

Help with BSODs and reboots Sabertooth X58

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with BSODs and reboots Sabertooth X58

    abcdefghij
    Last edited by LemonMeringueTy; 02-10-2014, 05:37 AM.

  • #2
    Do you have the latest BIOS, mobo drivers, GPU driver, etc? Are voltages set to correct levels? If yes to all, could you post your BIOS settings?


    Pls offer comments on support I provide, HERE, in order to help me do a better job here:

    Tman

    Comment


    • #3
      Did you use the Marvel Driver from the ASUS website? Also keep in mind that SATA 6Gb is still new and needs to have time to work to the kinks, plus it?s not that much faster than SATA 3Gb at this time. One last thing if you were to revert back to your SATA 6Gb port, be sure to set up your boot drives accordingly, IDE or ACHI depending on your install.
      CPU I7-980X @ 3.81Ghz
      MB ASUS P6X58D-E
      GPU GTX480 @ 770Mhz
      RAM 12Gb Patriot Viper Xtreme Division-2 DDR3 @ 1908Mhz
      PSU Corsair AX 850W
      SSD: Intel X25M 80Gb
      HD 2x WD VelociRaptors 150Gb in Raid-0

      Sager NP8662
      CPU: Intel Q9100 @ 2.38 GHz
      GPU: GTX 260M @ 612Mhz
      RAM: G.Skill DDR3 1066Mhz 4Gb
      SSD: Intel X25M 120Gb

      Comment


      • #4
        They are still tweaking some of the new SATA drivers, so might want to keep an eye on their site for updates on those mobos incorporating it. Sounds like you're good fore now though. Have fun!


        Pls offer comments on support I provide, HERE, in order to help me do a better job here:

        Tman

        Comment

        Working...
        X