Memory setting suggestion F3-12800CL7T-6GBPI

[itwl]

Hi, I recently bought the F3-12800CL7T-6GBPI
PI series memory, and am experiencing some instability problems after overclocking my Asus Rampage 3 Formula MB's i7-950 CPU. My current settings for CPU overclocking are

Cpu= 20x200
Dram=1600
uncore=3200
qpiFreq=7200

Cpu V= 1.325v
QpiV= 1.35v
PLL= auto.
DramV= 1.65v
LLC= Full calibration
IOH= 1.166v

Cpu and Pci Spread=Disable
C1E and EIST= Disable

Is this a good setting? I can boot into windows 7, but after some time, I would get the BSOD. Also could you suggest a good timing and DRAM settings in general? thanks.

[Tradesman]

DRAM voltage should be at 1.5, so the instability could in part be from overvolting to 1.65. Timings at 1600 should be 7-8-7-24, with command rate (CR) at 2N.

[GSKILL TECH]

QPI Voltage may also be too high. Test for the stable voltage.

Thank you
GSKILL TECH