No, what I mean is that the QPI will need more voltage since you overclocked the BCLK to 200.
Yes, the QPI/DRAM Core Voltage can be over 1.40V, but make sure you have an aftermarket CPU cooler to keep temps cool.
Thank you
GSKILL TECH
Announcement
Collapse
No announcement yet.
F3-12800CL9T2-12GBNQ (6x2GB) /w P6X58D-E mobo & i7-980x O.C. to 4.0Ghz
Collapse
X
-
Did you mean CPU RATIO ( Multiplier) of 8? when you wrote 200x8 But then my CPU will be at 1600Mhz - And I want to be 4Ghz. so in I need 200x20 for 4Ghz.
And... do you think QPI/Dram Core Voltage can go above 1.4V Volts?
Thanks.
Leave a comment:
-
No, your QPI/DRAM Core Voltage was probably slightly off. You always need to test for the stable voltage. A little different can cause stability problems.
The memory will be fine with 200 x 8, 160 x 10, or 133 x 12
Since 160 was OK and 200 had problem, maybe not enough voltage for QPI @ 200.
Thank you
GSKILL TECH
Leave a comment:
-
Some Updates
I did not found any answer from GSKILL but my update would be:
It seems that I have stabilized System by lowering BLCK Frequency (Bus Speed) to 160 and upping Mutliplier (CPU Ratio Setting) to 25
I believe memory could not handle so high Bus Speed numbers.
My questions stays: Should I get faster memory for much faster performances?
Leave a comment:
-
F3-12800CL9T2-12GBNQ (6x2GB) /w P6X58D-E mobo & i7-980x O.C. to 4.0Ghz
Dear G.Skill Support,
I have a serious question about setting up My Bios with G.SKILL NQ 12GB (6 x 2GB) Model F3-12800CL9T2-12GBNQ
My setup is:
Intel i7-980X 3.33Ghz (O.C. to 4Ghz)
Asus P6X58D-E Motherboard
G.SKILL NQ 12GB (6 x 2GB) DDR3 Ram
I made my system as much as possible stable with following BIOS settings but I still get some random freezing issues and first reason I find is because of Memory.
Temps Are completely fine (around 30-35C) (75-80C) on full Prime load) And I know people are fine with i980X O.C. to 4Ghz or 4.2Ghz easy
So,
My Current BIOS Settings:
Ai Overclock: Manual or X.M.P. - same thing.
CPU Ratio Setting: 20
Intel Speed Step: Disabled
BLCK Frequency: 200
PCIE Frequency: 100
DRAM Frequency: DDR4 - 1603Mhz
UCLK Frequency: Auto
QPI Timing Control: All on [Auto] or 9.9.9.24 on X.M.P. Automatic settings.
CPU Voltage Control: Manual
CPU PLL Voltage: Auto
QPI/DRAM Core Voltage: 1.40000
CPU Voltage: 1.35000
IOH Voltage: Auto
IOG PCIE Voltage: Auto
ICH PCIE Voltage: Auto
DRAM BUS Voltage 1.64
Could you please suggest me which settings I'd have to adjust to make my system more stable.
Another thing is about memory itself - do I have the right chips? Maybe I should have gotten something better? Performance-vise
I appreciate your GSkill time!!
Leave a comment: