baymavi - vevobahis - mobilbahis - https://guncelgirisi.com/. instagram takipçi satın al - instagram takipçi satın al mobil ödeme

Announcement

Collapse
No announcement yet.

P6X58D-E good for Ripjaws 12GB (3 x 4GB)?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • P6X58D-E good for Ripjaws 12GB (3 x 4GB)?

    Hi everyone,

    Is the ASUS P6X58D-E LGA 1366 compatible with G.SKILL Ripjaws Series 12GB (3 x 4GB) DDR3 1333? I understand that they are compatible but I can?t find the G.Skill (3x4) in the Asus list!!!
    Thanks in advance.

  • #2
    I have that same board running the 3X2GB PI's, it would be more then safe to say your good to go man! Especially DDR3-1333 all I would do is get a set with some lower latency sticks, they are out there and are not too badly priced.
    CPU I7-980X @ 3.81Ghz
    MB ASUS P6X58D-E
    GPU GTX480 @ 770Mhz
    RAM 12Gb Patriot Viper Xtreme Division-2 DDR3 @ 1908Mhz
    PSU Corsair AX 850W
    SSD: Intel X25M 80Gb
    HD 2x WD VelociRaptors 150Gb in Raid-0

    Sager NP8662
    CPU: Intel Q9100 @ 2.38 GHz
    GPU: GTX 260M @ 612Mhz
    RAM: G.Skill DDR3 1066Mhz 4Gb
    SSD: Intel X25M 120Gb

    Comment


    • #3
      Thanks Schwanke78 for your answer!
      I think you are right but I still have some doubts because I don?t see the similarity between the (6GB 3X2GB PI's) your case and the (Ripjaws12GB 3 x 4GB DDR3) my case!!
      The price difference between CL9 and CL7 is more than $200!!! Do you think the difference in real life performance between GSKILL F3-10666CL9T-12GB and the Trident F3-12800CL7T-12GB justify the $240 difference?

      Comment


      • #4
        Na since you will have 12GB of Ram the refresh rate of the lower latency will not really be noticed. Your will be good to go, plus GSKILL F3-10666CL9T-12GB are low voltage so you got some room to play in the fine-tuning of the dims. One last thing don?t forget you get Mem OK with that board if everything else fails on BIO timings.
        CPU I7-980X @ 3.81Ghz
        MB ASUS P6X58D-E
        GPU GTX480 @ 770Mhz
        RAM 12Gb Patriot Viper Xtreme Division-2 DDR3 @ 1908Mhz
        PSU Corsair AX 850W
        SSD: Intel X25M 80Gb
        HD 2x WD VelociRaptors 150Gb in Raid-0

        Sager NP8662
        CPU: Intel Q9100 @ 2.38 GHz
        GPU: GTX 260M @ 612Mhz
        RAM: G.Skill DDR3 1066Mhz 4Gb
        SSD: Intel X25M 120Gb

        Comment


        • #5
          Hi

          I have two sets of F3 10666CL9T-12 GBRL (24GB total) and this MB

          I cant get either set to run at their 1333mhz rating without losing big chunks of RAM.

          Gary
          CPU i7-980X
          MB ASUS P6X58D-E
          GPU GTX 480
          RAM 24Gb G.Skill F3 10666CL9T-12GBRL x 2
          PSU Corsair 850W
          Windows 7 64 Ultimate

          Comment


          • #6
            Thanks Schwanke78?That sounds like music to my ear

            Comment


            • #7
              Thanks gazzabass / Gary for the heads up. I’ll follow your post and hopefully you find a solution!!
              Last edited by GPeace; 09-05-2010, 01:28 PM.

              Comment

              Working...
              X