baymavi - vevobahis - mobilbahis - https://guncelgirisi.com/. instagram takipçi satın al - instagram takipçi satın al mobil ödeme

Announcement

Collapse
No announcement yet.

Help with F3-16000CL9T-6GBRH on GA-X58A-UDR3

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with F3-16000CL9T-6GBRH on GA-X58A-UDR3

    Hello,

    New build, not looking to OC i7 930. Looking for BIOS settings to run RAM safely at 2000 Mhz. MOBO v 1.0 BIOS rev F5.

    Regards,
    Paul

  • #2
    http://www.gskill.us/forum/showthread.php?t=1322
    Asus P6TD Deluxe BIOS 0509 | Core i7 920 D0 4.2GHz | 6GB G.Skill Trident PC316000CL9T 1600MHz 7-7-7-20 | OZC Vertex 60GB | Silverstone TJ07 | Be Quiet 650W | Sapphire HD4870 | Heatkiller 3.0 Cu | Swiftech MWC60 | XSPC RX480 & Black Ice Stealth GT 240 | Swiftech MCP655 & EK X-Top Rev.2 | 6 x Scythe GT 1450 | Sunbeam Rheobus Extreme

    Comment


    • #3
      Thanks, Big Elf. I found this thread early on and starting with optimized defaults and applying the suggested settings for 2000mhz I get a BSOD after 30 seconds of stress testing. At 1600mhz the system is stable.

      Comment


      • #4
        What QPI/VTT Voltage did you use?

        This thread may help:

        http://www.gskill.us/forum/showthrea...highlight=x58a

        Thank you
        GSKILL TECH

        Comment


        • #5
          I tried both 1.595 & 1.615, which were the 2 closest choices to 1.6

          Comment


          • #6
            That was unstable? You may want to try lower, some i7 930's will only need 1.40V-1.50V, so you may be over-volting too much. This is why we ask people to overclock from DDR3-1600, that way you know exactly what voltages are required.

            Thank you
            GSKILL TECH

            Comment

            Working...
            X