Hello
i have the F3-16000CL9T-6GBTD memory package, a P6X58D-E ASUS Motherboard, a I7 930 CPU, corsair H50 CPU Cooler, and a corsair RAM cooler
i am Using windows 7 64 Bit
i have ran the cpu under a stress test at 4.1 but after that stuff gets unstable, this PC is only 2 days old so im still learning
I cannot get the ram to boot at 2000 Mhz, max i was able to get was 1603 Mhz, i have tried alot of different things so maybe you can tell me what i am doing wrong, thanks.
if you need any more info ill post asap, thanks again
************************************
CPU Frequency 4000Mhz
Dram Frequency 1603
Ai Overclock Tuner: Manual
CPU Ratio Setting: 20.0
Intel(R) SpeedStep (TM) Tech: Enabled
Xtreme Phase Full Power Mode: Enabled
BCLK Frequency: 200
PCIE Frequency: 100
DRAM Frequency [DDR3-1603Mhz]
ULCK Frequency: [3208Mhz]
QPI Link Data Rate: [Auto]
ASUS/3rd Party UI Priority: [ASUS Utility]
CPU Voltage Control: Manual
CPU Voltage: 1.325
CPU PLL Voltage: Auto
QPI/DRAM Core Voltage: 1.5 (i tried 1.6v when i attempted 2000mhz)
IOH Voltage: Auto
IOH PCIE Voltage: Auto
ICH Voltage: Auto
ICH PCIE Voltage: Auto
DRAM Bus Voltage: 1.5 (i tried 1.6v when i attempted 2000mhz)
DRAM Timing Control
1st Information : 9-9-9-24-5-88-14-8-24-0
CAS# Latency: 9
RAS# to CAS# Delay: 9
RAS# PRE Time: 9
RAS# ACT Time: 24
RAS# to RAS# Delay: auto
REF Cycle Time: auto
Write Recovery Time: auto
READ to PRE Time: auto
FOUR ACT WIN Time: auto
Back-to-Back CAS# Delay: auto
2nd Information : 2N-59-61-62
DRAM Timing Mode: 2N
the rest is set to auto
i have the F3-16000CL9T-6GBTD memory package, a P6X58D-E ASUS Motherboard, a I7 930 CPU, corsair H50 CPU Cooler, and a corsair RAM cooler
i am Using windows 7 64 Bit
i have ran the cpu under a stress test at 4.1 but after that stuff gets unstable, this PC is only 2 days old so im still learning
I cannot get the ram to boot at 2000 Mhz, max i was able to get was 1603 Mhz, i have tried alot of different things so maybe you can tell me what i am doing wrong, thanks.
if you need any more info ill post asap, thanks again
************************************
CPU Frequency 4000Mhz
Dram Frequency 1603
Ai Overclock Tuner: Manual
CPU Ratio Setting: 20.0
Intel(R) SpeedStep (TM) Tech: Enabled
Xtreme Phase Full Power Mode: Enabled
BCLK Frequency: 200
PCIE Frequency: 100
DRAM Frequency [DDR3-1603Mhz]
ULCK Frequency: [3208Mhz]
QPI Link Data Rate: [Auto]
ASUS/3rd Party UI Priority: [ASUS Utility]
CPU Voltage Control: Manual
CPU Voltage: 1.325
CPU PLL Voltage: Auto
QPI/DRAM Core Voltage: 1.5 (i tried 1.6v when i attempted 2000mhz)
IOH Voltage: Auto
IOH PCIE Voltage: Auto
ICH Voltage: Auto
ICH PCIE Voltage: Auto
DRAM Bus Voltage: 1.5 (i tried 1.6v when i attempted 2000mhz)
DRAM Timing Control
1st Information : 9-9-9-24-5-88-14-8-24-0
CAS# Latency: 9
RAS# to CAS# Delay: 9
RAS# PRE Time: 9
RAS# ACT Time: 24
RAS# to RAS# Delay: auto
REF Cycle Time: auto
Write Recovery Time: auto
READ to PRE Time: auto
FOUR ACT WIN Time: auto
Back-to-Back CAS# Delay: auto
2nd Information : 2N-59-61-62
DRAM Timing Mode: 2N
the rest is set to auto
Comment