Hi guys.
I'm having problems with a new build. The component list is:
EVGA X58 SLI Micro motherboard
i7 920 DO retail processor
GSKILL F3-16000CL9T-6GBTD memory kit
WD 750GB Caviar Black hard drive
Saffire Vapor-X HD5770 graphics card
Enermax Infiniti 720W PSU
My problem is that after assembling the PC it hangs on the b8 post code with all 3 RAM sticks in place. If I use just 2 sticks it boots fine and loads Windows (WIN764).
I've memtested each individual stick and they have passed, with bios settings at default.
I'm thinking that the bios settings need to be adjusted to suit the GSKILL RAM but I don't know where to start. I'm not looking to overclock at this stage, just get all 3 sticks up and running.
Any advice will be greatly appreciated
Thanks, Rob.
I'm having problems with a new build. The component list is:
EVGA X58 SLI Micro motherboard
i7 920 DO retail processor
GSKILL F3-16000CL9T-6GBTD memory kit
WD 750GB Caviar Black hard drive
Saffire Vapor-X HD5770 graphics card
Enermax Infiniti 720W PSU
My problem is that after assembling the PC it hangs on the b8 post code with all 3 RAM sticks in place. If I use just 2 sticks it boots fine and loads Windows (WIN764).
I've memtested each individual stick and they have passed, with bios settings at default.
I'm thinking that the bios settings need to be adjusted to suit the GSKILL RAM but I don't know where to start. I'm not looking to overclock at this stage, just get all 3 sticks up and running.
Any advice will be greatly appreciated
Thanks, Rob.
Comment