I am having trouble getting this ram running a spec speeds. I currently have it running at 1908mhz with a 3.3ghz cpu speed 24/7 stable, but I would like to run it at manufacture spec speeds and timings. I have the Gigabte x-58 extreme revision 1 board running the f10 bios and the bios settings are as follows.
cpu ratio x21
bclk freq 159
memory multi x12 1908 mhz
qpi ratio auto @ 5.72 ghz
mem timings are 9-9-8-24 1t 75 trfc
cpu vcore: auto
dram: 1.6 volts
qpi: auto
Ioh: auto
All of my voltages are at auto except for the ram, which i manually set. I have tried setting the xmp profile and cannot get the system to run stable for more than a few mintues. Any help that you guys can offer would be great, I'm satisfied with it at 1908mhz speed on the ram, but would like to get it running at spec speeds. Thats really why i spent the money to upgrade.
cpu ratio x21
bclk freq 159
memory multi x12 1908 mhz
qpi ratio auto @ 5.72 ghz
mem timings are 9-9-8-24 1t 75 trfc
cpu vcore: auto
dram: 1.6 volts
qpi: auto
Ioh: auto
All of my voltages are at auto except for the ram, which i manually set. I have tried setting the xmp profile and cannot get the system to run stable for more than a few mintues. Any help that you guys can offer would be great, I'm satisfied with it at 1908mhz speed on the ram, but would like to get it running at spec speeds. Thats really why i spent the money to upgrade.
Comment