baymavi - vevobahis - mobilbahis - https://guncelgirisi.com/. instagram takipçi satın al - instagram takipçi satın al mobil ödeme

Announcement

Collapse
No announcement yet.

ga-p55a-ud4p + f3-12800cl9d-4gbnq voltage

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ga-p55a-ud4p + f3-12800cl9d-4gbnq voltage

    I can't seem to get this to operate in a stable fashion at 1600 (only works well at 1333).
    Any ideas for voltages? I have 4GB in my system at the moment. I've tried cranking up the DRAM voltage to 1.6v with no lasting luck.
    System: i7 860, gigabyte ga-p55a-ud4p, f3-12800cl9d-4gbnq

  • #2
    Did you set memory frequency to DDR3-1600, memory timings tCL 9 - tRCD 9 - tRP 9 - tRAS 24 - Command Rate 2? Should have no problems with those settings. Try testing them individually to eliminate the possibility of defective sticks.

    Thank you
    GSKILL SUPPORT

    Comment


    • #3
      That's what they're set to. I've run memtest for about an hour with no hitches. I'll test them individually (still at 1.5v?) and get back with you

      Comment


      • #4
        Yep, 1.50V should be sufficient. So although memtest clears, the system is still unstable with the new settings?

        Thank you
        GSKILL SUPPORT

        Comment


        • #5
          yeah..initially, it would boot and be fine until it went under load. i could get it to consistently turn off during the silly "windows experience index" system test as soon as the "testing memory speed" bit popped up (instant shutdown, no auto-restart). I upgraded the bios to F7 (from F6), and then the system didn't die during the WEI thingy, but crashed randomly a few times in a similar instant off fashion (along with a very brief (flash) BSOD once). I'll try the stick individually when i return tonight and let you know how it went.

          Comment

          Working...
          X