Hello,
I have some problems in my new PC configuration seems to be G.Skill Ripshaw RAM problem.
The System :
Windows7 64bits
Mainboard Asus P7P55d
Rams F3-12800CL9D-4GBRL (with 4x2GB pakage), buy in 2 package of 2x2GB
CPU Intel I7 Core 860
Bios Update from Asus1102
I have some BOSD or freeze (after feww seconds or minutes...) after windows launching in 8GB configuration (4x2GB).
No problems in 4GB or 6GB configuration (no freeze, no BOSD).
MemTest+ are OK for all RAM in dual configuration (2x2GB).
I tried some configuration (XMP, manual ..) without success.
For exemple, i tried this configuration from GSKILL forum :
i7 860 processor:
AI Overclock Tuner - Manual
CPU Ratio Setting - 17.0 for 2.83GHz
BCLK Frequency - 167
DRAM Frequency - DDR3-2004MHz --> set to DDR3-1606 (both same result --> no success)
DRAM Voltage - 1.65V
CPU PLL Voltage - 1.90V
DRAM Timing Control (submenu)
CAS Latency - 9
RAS to CAS Delay - 9
RAS PRE Time - 9
RAS ACT Time - 27 --> set to 24 (both same result--> no success)
DRAM Timing Mode - 1N --> set to 2N (both same result --> no success)
All others can be AUTO
What are best RAM BIOS settings for my hardware configuration (in 4x2GB) ?
Thank you from french GSKILL user!
I have some problems in my new PC configuration seems to be G.Skill Ripshaw RAM problem.
The System :
Windows7 64bits
Mainboard Asus P7P55d
Rams F3-12800CL9D-4GBRL (with 4x2GB pakage), buy in 2 package of 2x2GB
CPU Intel I7 Core 860
Bios Update from Asus1102
I have some BOSD or freeze (after feww seconds or minutes...) after windows launching in 8GB configuration (4x2GB).
No problems in 4GB or 6GB configuration (no freeze, no BOSD).
MemTest+ are OK for all RAM in dual configuration (2x2GB).
I tried some configuration (XMP, manual ..) without success.
For exemple, i tried this configuration from GSKILL forum :
i7 860 processor:
AI Overclock Tuner - Manual
CPU Ratio Setting - 17.0 for 2.83GHz
BCLK Frequency - 167
DRAM Frequency - DDR3-2004MHz --> set to DDR3-1606 (both same result --> no success)
DRAM Voltage - 1.65V
CPU PLL Voltage - 1.90V
DRAM Timing Control (submenu)
CAS Latency - 9
RAS to CAS Delay - 9
RAS PRE Time - 9
RAS ACT Time - 27 --> set to 24 (both same result--> no success)
DRAM Timing Mode - 1N --> set to 2N (both same result --> no success)
All others can be AUTO
What are best RAM BIOS settings for my hardware configuration (in 4x2GB) ?
Thank you from french GSKILL user!
Comment