[ Perfect Storm ] F3-16000CL8T-3GBPS + asus p6t deluxe v2

[jasae74]

Could you give me bios settings?

I would like to set 8-8-8-21 2N 2000mhz

My best regards

[GSKILL TECH]

Simply use the XMP Profile, or enter the settings you listed.

Ai Overclock Tuner - Manual
CPU Ratio Setting - 17
Intel SpeedStep Tech - Disabled
BCLK Frequency - 167
DRAM Frequency - DDR3-2000
UCLK Frequency - 4000MHz
QPI Link Data Rate - AUTO

DRAM Timing Control
CAS Latency - 8
tRCD - 8
tRP - 8
tRAS - 24
Command Rate - 2N

DRAM Bus Voltage - 1.64V

Load Line Calibration - Enabled

Let me know how that goes.

Thank you
GSKILL SUPPORT

[jasae74]

And

What about of bios settings if i set i920 (3200-3500 mhz)?

Will memory run at 2000mhz too?

Which cpu ratio is better for this processor settings?

I have check qpi/dram core volt in xmp : 1.525v Do not you think is a very high value?

What is maximum qpi volt for this memories?

Merry xmas!

[Tradesman]

You are better off loading your settings/timings manually - XMP is very generic and applied differently by different DRAM manufacturers, so the voltage applied can sway from to low to to high

[jasae74]

Yes i know xmp profile is not perfect system in voltages I definetely am un unlucky guy cause my new perfect storm have one stick that does not run in guaranteed settings 8 8 8 21 2N when i try set processor in 3200-3400 mhz.....

I would ask help too in other questions i made

Regards