Tweet
Hi,
I just received a new set of this RAM. I had posted here before regarding a cold boot issue and narrowed it down to one of the sticks causing the problem. I have a new set via RMA.
I would like to know what I need to set manually in the BIOS.
CPU: AMD Phenom II x4 955
MB: ASUS M4A79XTD EVO
RAM: F3-10600CL8D-4GBHK
I have the following set manually already:
DRAM Command Rate: 2T
TCL: 8
TRCD: 8
TRP: 8
TRAS: 21
DRAM Voltage: 1.5v
Everything else is auto for the RAM. I also have the NB and SB settings all set to auto. Should I need to change anything else to manual settings? I would like to know the right settings before I reimage Win7 and start over.
Thanks in advance
I just received a new set of this RAM. I had posted here before regarding a cold boot issue and narrowed it down to one of the sticks causing the problem. I have a new set via RMA.
I would like to know what I need to set manually in the BIOS.
CPU: AMD Phenom II x4 955
MB: ASUS M4A79XTD EVO
RAM: F3-10600CL8D-4GBHK
I have the following set manually already:
DRAM Command Rate: 2T
TCL: 8
TRCD: 8
TRP: 8
TRAS: 21
DRAM Voltage: 1.5v
Everything else is auto for the RAM. I also have the NB and SB settings all set to auto. Should I need to change anything else to manual settings? I would like to know the right settings before I reimage Win7 and start over.
Thanks in advance
Comment