F3-16000cl9d-4gbtd + asus p7p55d pro

[burichi]

Both memtest and CPU-Z show the clock speed at 1033MhZ when it's supposed to be 2000MhZ.

I have an:

-ASUS P7P55D Pro
http://www.newegg.ca/Product/Product...82E16813131405

-G.SKILL Trident 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 2000
http://www.newegg.ca/Product/Product...82E16820231282

-Intel Core i5 2.66GhZ
http://www.newegg.ca/Product/Product...82E16819115215

My BIOS Settings in AI Tweaker are:

AI Overclock Tuner-Manual
CPU Ratio- 14
Speed Step- Enabled
Xtreme Phase-Auto
BCLK Frequency-200
PCIE Frequency-100
DRAM Frequency- 2000MhZ

Timings
CAS Latency - 9
RAS to CAS Delay - 9
RAS PRE Time - 9
RAS ACT Time - 27

Timing Mode 1N

CPU Voltage Mode- OFfset
DRAM Voltage- 1.6V
CPU PPL - 1.9V

Everything else is set to Auto.

[GSKILL TECH]

Dear Customer

In CPU-z, there is a memory tab that shows "DRAM Frequency". What is the current value? Note that the value is base frequency, not after DDR (double data rate) meaning it should show roughly 999-1000MHz.

The settings you have look correct, but not sure why memory frequency would be 1033 or DDR3-2066, post up some screen shots of BIOS or CPU-z so I can see what's going on.

Thank you
GSKILL SUPPORT

[burichi]

Oh I wasn't aware of that. I also misread the number shown in CPUZ. Here's a screenshot, just to ensure it's all good.

[Tradesman]

Looks good, if you have any problems you can always change command rate to 2T