Hello,
I am using F3-10600CL9D-4GBNT RAM on my Gigabyte MA770T-UD3P board under Linux and encounter segfaults (crashes) from time to time. I tested the memory with both memtest86 and memtest86+ and they find no errors. I also tested both BIOS revisions F1 and F3 and F1 gives me less crashes as it looks.
The problem is that the board does not supply the 1.5 volt that are needed by the RAM. According to the bios it is running at 1.616 V. Can this be an issue? What settings should I change to get it stable?
Any help will be greatly appreciated.
EDIT: The memory settings in the BIOS are all set to auto. I tried increasing the RAM voltage as I read here this might help, but it made things worse.
mwallace
I am using F3-10600CL9D-4GBNT RAM on my Gigabyte MA770T-UD3P board under Linux and encounter segfaults (crashes) from time to time. I tested the memory with both memtest86 and memtest86+ and they find no errors. I also tested both BIOS revisions F1 and F3 and F1 gives me less crashes as it looks.
The problem is that the board does not supply the 1.5 volt that are needed by the RAM. According to the bios it is running at 1.616 V. Can this be an issue? What settings should I change to get it stable?
Any help will be greatly appreciated.
EDIT: The memory settings in the BIOS are all set to auto. I tried increasing the RAM voltage as I read here this might help, but it made things worse.
mwallace
Comment