If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
You can go to CL4-4-3-10 (+ drop every single value what your BIOS allows you to drop) even on 800Mhz. on either of setups only advantage you get at speeds over 900Mhz and on other ratio than 1:2 speed would have to be +1081Mhz to gain real advantage of the memory speed.
Hell, you can easily do CL6-6-5-14 hit everything else to Auto and drop that to 1100Mhz. That would be faster but stable at least faster what your system can handle.
Rugger1, what processor do you have? Not that it fixes the situation, but DDR2-800 CL4 has faster write/copy speeds most of the time.. you should pull up Everest Ultimate and see what the benchmark speeds are just to see.
Anyone still having issues operating DDR2-1066? I am directly working with GIGABYTE with this issue and we are looking for cases to solve. Please email directly to ustech@gskill.com with subject "GIGABYTE GA-MA790X-UD4P problem" and we will help you resolve your problems.
I am still getting errors with prime95 with the latest F7 bios update running these 8GB of rams @ 1066. Yes, I tried increasing my Row Cycle Time to 42T, still doesn't change a thing.
i set my memory timings as close to this as i could. btw this is what the email told me to set them at. and i have no errors in memtest or prime 95. i ran memtest for 5 hours and prime 95 for 8. i have a 550be unlocked and overclocked.
i set my memory timings as close to this as i could. btw this is what the email told me to set them at. and i have no errors in memtest or prime 95. i ran memtest for 5 hours and prime 95 for 8. i have a 550be unlocked and overclocked.
Cas lataency - 4t
Ras to cas - 4t
Row precharge - 4t
Min ras - 12t
1t/2t - 2t
Twtr command - 4t
Trfco - 127.5 / 127.5
Write recovery - 6t
Precharge - 3t
Row cycle -30t
Ras to ras - 4t
Is Trfc2 for DIMM2 set to 127.5 as well?
Are you also running 8GB?
here are my exact settings in my bios. i also disabled epp and manually set my memory to run at 800 mhz. im not using any auto settings for my memory. and it is stable in memtest with no errors.
yes i have acc enabled and my cpu is unlocked running 4 cores are 3.6 stable with no errors in prime 95.
Comment