If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the
register
link to proceed. To start viewing messages,
select the forum you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
Asus P5K Pro + E8400 + GSkill F2-8500CL5-2GBPK * 2
Have you tried adjusting voltages? Some are very high, but I'm not too sure if they need to be. Also, you can try slightly lower frequency, then work your way up. It may not be the timings holding you back.
Have you tried adjusting voltages? Some are very high, but I'm not too sure if they need to be. Also, you can try slightly lower frequency, then work your way up. It may not be the timings holding you back.
Thank you
GSKILL TECH
The last voltage I've tried was 2.14v... I'll try 2.00v.
The FSB Strap to North Bridge has any influence?
Thanks
Edit:
2.00v not good too... I'm going to lower it a bit more...
Testing with 1.90v... -> No good...
Tested 1.94v -> No good...
Testing 2.02v -> No good...
Testing now 5-6-6-20 ... 70 ... 8 at 1.96v -> No good!
--------------------------------------
Now testing 5-6-6-20...70...8 at 1.90v at DDR2-1132Mhz - No good...
Now testing 5-6-6-20...70...8 at 1.90v at DDR2-1120Mhz - 5 passes in test #5 of memtest86+ v4.20 and no errors. I'm assuming that's 100% stable...
--------------------------------------
Now testing 5-6-6-20...70...8 at 1.90v at DDR2-1129Mhz - No good...
Now testing 5-6-6-20...70...8 at 1.90v at DDR2-1127Mhz - No good - 2 errors (at least)
Now testing 5-6-6-20...70...8 at 1.90v at DDR2-1124Mhz - No good - 4 errors in 4 passes at test #5 in memtest86+ v4.20!
Now testing 5-6-6-20...70...8 at 1.90v at DDR2-1122Mhz - No good... - 2 errors in 10 passes at test #5 in memtest86+ v4.20!
--------------------------------------
Looks like that with this settings, the max I can get is DDR2-1120Mhz...
May have hit the wall, to get any higher would prob have to drop to CL6 and then would more than likely see a little gain in frequency, but a bigger drop to overall performance
Pls offer comments on support I provide, HERE, in order to help me do a better job here:
Can run Prime or a different stress testing program...
Well, I've been trying to check how much I can raise FSB with CPU multi on 6 and mems at 1:1 (wich is 400Mhz divider, can't select lower, ), but at 525Mhz, I think I'm stable with Prime95 but randomly I have Explorer and Firefox crashes...
I don't know if Prime95 really stresses NB. I've tryed IBT and it's ok too but Explorer and Firefox crashes sometimes randomly...
Comment